Table of Contents
Advertisement
The number of days in a month / the number of days in a year varies depending on
the month / year (leap year), so use the month offset if you specify in months.
Detection result
[Quality]
It is the quality obtained as a result of verification.
[Center X, Y]
The center coordinate of the extracted character area.
2.9
Input / Output
Input judgement
Judge the state of the specified control input terminal.
Processing condition
[Input terminal]
USER_IN1-4
·················Judge the status of USER_IN1-4 USER_OUT1-4.
It can be assigned to the control input terminal (DI) by the input / output setting.
[Judge logic]
OFF ·············Determine that the specified input is OFF.
ON ··············Determine that the specified input is ON.
Rising Edge ··When it detects the rising edge of the specified input, OK judgment is
made.
Falling Edge ··When it detects the falling edge of the specified input, OK judgment is
made.
Output control
Change the state of the control output terminal.
Processing condition
[Output terminal]
USER_OUT1-8
···················Judge the status of USER_OUT1-8.
It can be assigned to the control output terminal (DO) by the input / output setting.
No terminal output
···················It is used when only the judgment result of the tool is used without
being reflected on USER_OUT.
[Output logic]
OFF ·············Turn OFF the specified output.
ON ··············Turn ON the specified output.
VisionNavi User Manual
62
Advertisement
Table of Contents
