Advantech VisionNavi User Manual page 29

{HHmmss} ····Time(HHmmss)
Ex) 6:30:59 PM →183059
{yyyy} ··········Year
Ex) 2017 →2017
{yy} ·············Year
Ex) 2017 →17
{MM} ···········Month
{dd} ·············day
{HH} ············Hour
{mm} ···········minute
{ss} ·············second
{ff} ···············subsecond
{nn} ·············Serial number from 00 to 99
{nnnn} ··········Serial number from 0000 to 9999
{CAM} ··········Camera number.
Ex) CAM1
{PROJ} ········Inspection project name
Ex) Inspection 001
{OKNG} ·······Inspection results up to the previous tool. OK or NG.
{DM[0]} ········Any DM value. Rewrite the contents in brackets as Save image
necessary.
Note! If a file with the same name is created due to a sequential number lap,
the new image file will be overwritten.
[Format]
You can select each format of 'tiff', 'bmp', 'png', 'jpg', 'hobj'. To read again with Vision-
Navi, please choose one of 'tiff', 'bmp', 'png'.
[Count (n) Reset condition]
Sets whether to reset the number to 0 when {nn} or {nnnn} is used as the file name.
Reset Invalid Continuation continues even if continuous operation is interrupted or
restarted.
When?Reset at start of continuous shot] is selected, it starts from 0 when continuous
imaging is started / resumed.
When reset by reset input or reset communication command is executed, it is reset to
0 regardless of the setting.
[Thinnings]
Image saving is performed every set value + 1 time.
[Disk storage capacity]
If the remaining capacity of the saved folder falls below the specified size, an error
occurs and stops.
<<Point>>
Because SSD is a device with limited number of times of writing, the following
method is recommended when enormous number of file accesses occur.
23 VisionNavi User Manual