Table of Contents
Advertisement
Measure width of pair edges
Measure the distance between two edges and the edge in the target region.
Judgement method
By difference from master
Detect the difference with the registered master image and make a judgment on the
detection result.
By measured value
The judgment is made on the value of the feature value obtained as the detection
result.
Detect condition
The detection condition setting parameters are shown below.
Line
Edge dir.
·Both edge
·Dark -> Light
·Light -> Dark
Edge strength
Min strength
Width
Target edge
Filter (sigma)
Fuzzy function
Comparison mode (only when judging by difference with master image)
·Compare abs ·Compare tolerance(+/-)
VisionNavi User Manual
Circle
50
Arc
Advertisement
Table of Contents
