Advantech DLoG DLT-V72 Series User Manual
Hide thumbs
Also See for DLoG DLT-V72 Series:
- Startup manual (98 pages) ,
- Quick start manual (8 pages) ,
- User manual (191 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Advantech DLoG DLT-V72 Series
Summary of Contents for Advantech DLoG DLT-V72 Series
- Page 1 User Manual DLT-V72 Series Industrial Computer...
- Page 2 Note regarding all links and website content included in this document: Advantech Co., Ltd. is not responsible for the accessibility of the websites and for the content of external links contained in this document. The content and accessibility of the linked...
- Page 3 The FreeRTOS source text is available from: http://sourceforge.net/projects/freertos/files/FreeRTOS/V7.4.0/ or from Advantech. Manufacturer Advantech Co., Ltd. No. 1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 11491, Taiwan, R.O.C. Simplified EU declaration of conformity The manufacturer: Advantech Co., Ltd.
- Page 4 A complete description of the problem Find the contact data of our Global Advantech Service Centers on our website: http://erma.advantech.com Initial inspection Before setting up the system, check that the items listed below are included and in good condition.
- Page 5 Our dealers are well trained and ready to give you the support you need to get the most from your Advantech products. In fact, most problems reported are minor and can be easily solved over the phone.
-
Page 6: Table Of Contents
Contents 1. Introduction ..........10 1.1. About the DLT-V72 manuals ....................... 11 1.1.1. Manuals for all DLT-V72 models .................... 11 1.1.2. Further available manuals ...................... 12 1.1.3. Abbreviations used ......................... 12 1.1.4. Design elements used in the manuals ..................13 1.1.5. Text formatting conventions ....................14 2. - Page 7 6. Technical Data – Radio ......41 6.1. Identification of radio equipment variants .................... 42 6.2. Radio cards (optional) ......................... 43 6.2.1. Radio card for WLAN: SPARKLAN WPEQ-261ACN (BT) ............43 6.2.2. Radio card for WWAN: QUECTEL EC25 A/E ................. 44 6.3.
- Page 8 10.3. OS-specific configuration ........................87 10.4. Customer-specific WLAN profiles ....................... 88 10.5. Windows Zero Configuration (WZC) ....................88 10.6. Advantech WLAN Client Manager (IGX Tool) ..................89 10.6.1. Area of application ........................89 10.6.2. Program version 1.01 (new features) ..................89 10.6.3.
- Page 9 14.7. Touch stylus (optional) ........................154 14.8. Protective film for touchscreen (optional) ..................155 15. Repairs, Modifications ......156 15.1. Authorized Advantech Service Centers .................... 157 16. Maintenance ..........158 16.1. Regular maintenance work ....................... 159 16.1.1. General ..........................159 16.1.2.
-
Page 10: Introduction
Introduction Introduction DLT-V72 Series User Manual V2.70 10 / 173... -
Page 11: About The Dlt-V72 Manuals
DLT-V72. Keep the manuals for future use. Please contact Advantech if you require additional information or clarification. You can find the contact address in section Technical Customer Support. -
Page 12: Further Available Manuals
Introduction 1.1.2. Further available manuals Manual Contents Availability For target group ADLoG Config Software Skilled PDF file at our configuration Windows personnel websites tool description ADLoG Linux OS and Linux Skilled Upon request, please configuration personnel contact our Technical Customer Support Android OS and Android... -
Page 13: Design Elements Used In The Manuals
Introduction 1.1.4. Design elements used in the manuals Safety notes and other notices <Signal word> Damage to persons Signal word DANGER means that death or severe bodily injury will occur if this information is not observed. Signal word WARNING means that death or severe bodily injury can occur if this information is not observed. -
Page 14: Text Formatting Conventions
Text in italics, Please refer to manual section 1.1 manual chapters underlined Examples Program files File “quectel.exe“ … In quotation marks File names In directory “C:/Program Files” …. Directories Links Underlined, blue Website https://advantech.eu DLT-V72 Series User Manual V2.70 14 / 173... -
Page 15: Safety Chapter
Safety Chapter Safety Chapter DLT-V72 Series User Manual V2.70 15 / 173... -
Page 16: Please Read And Observe
Safety Chapter 2.1. Please read and observe. These safety instructions apply to all device models in the DLT-V72 Series: For DLT- V7210 and DLT-V7212 in various equipment levels. WARNING Non-observance of the safety instructions can result in injury to persons and in physical damage, e.g. due to incorrect commissioning procedures or due to maintenance work not being completed. -
Page 17: Battery Pack Safety
DLT-V72, the warranty for this device will be rendered void. 2. The battery packs must be certified for the DLT-V72. 3. Do not use battery packs from any other Advantech devices; they are not compatible. DLT-V72 Series User Manual V2.70... -
Page 18: Hf Radiation
Safety Chapter Prevent physical damage due to deep discharge. Storing the battery packs incorrectly will cause them to discharge completely (deep discharge) and thus damage them irreparably. To prevent a deep discharge: 1. Remove the battery pack from the battery pocket, if the DLT-V72 is not used for a longer period of time (more than one month). -
Page 19: Information On Safe Mounting
Safety Chapter 2.5. Information on safe mounting During the mounting process The DLT-V72 can fall down and cause injuries due to its weight. 1. Use the assistance of a second person for installation work. 2. Always hold the DLT-V72 by the housing with both hands. 3. -
Page 20: Information On Safe Electrical Installation
2. Do not open or modify the DLT-V72. 3. Only connect or disconnect electrical connections when the device is in a de-energized state. 4. Use only original Advantech power supply cables; these meet the specific requirements for low-temperature flexibility, UV resistance, oil resistance, etc. -
Page 21: Safety During Ongoing Work Operations
Safety Chapter 2.7. Safety during ongoing work operations Users of the DLT-V72 must be trained by skilled personnel and instructed in the operation of the device. All users must be familiar with all functions of the product they come into contact with. General 1. -
Page 22: Regular Maintenance Work
Accessories and peripherals Accessories and peripherals may only be installed or integrated if expressly approved by Advantech for the respective DLT-V72. If other parts are attached or installed and connected, claims for warranty and / or product liability will be lost. -
Page 23: Recycling Information
Safety Chapter 2.10. Recycling information Fig. 2.2: Recycling information icons DLT-V72 devices and lithium-ion batteries are recyclable; they may not be disposed of with general/domestic waste. They must be disposed of properly in accordance with local regulations. Please contact the responsible authorities in your country/region to find out about the applicable regulations for proper disposal, if necessary. -
Page 24: Functional Description
Functional Description Functional Description DLT-V72 Series User Manual V2.70 24 / 173... -
Page 25: Intended Use
Functional Description 3.1. Intended use DLT-V72 Industrial Computers are data communication terminals for use in commercial industries such as logistics, warehousing and manufacturing. Any other or additional use beyond this is regarded as improper use. DLT-V72 Industrial Computers are only permitted to be operated: In accordance with the defined intended use. -
Page 26: Mount, Operate And Service The Device Correctly
Do not damage the name plate or remove it from the device. Information on the labels on the device (examples): Model name Serial number FCC ID (Radio) Barcode (for Advantech-internal use only) DLT-V72 Series User Manual V2.70 26 / 173... -
Page 27: Unpacking, Storing
Unpacking, Storing Unpacking, Storing DLT-V72 Series User Manual V2.70 27 / 173... -
Page 28: Packing List
Unpacking, Storing 4.1. Packing list Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately: DLT-V72 Industrial Computer Cable cover and cable sealing set ... -
Page 29: Storage
Unpacking, Storing 4.4. Storage WARNING Personal injury from integrated UPS battery pack: Short- circuit, fire, chemical burns, toxic substances Some DLT-V72 devices contain an integrated UPS with a battery pack (hereinafter referred to as “battery pack”). These can ignite (risk of fire), cause chemical burns or release toxic substances. 1. -
Page 30: Technical Data - Device
Technical Data – Device Technical Data – Device DLT-V72 Series User Manual V2.70 30 / 173... -
Page 31: General
Technical Data – Device 5.1. General NOTE The latest status of technical data is available in the DLT-V72 data sheets at our websites. Intel ATOM™ E3845 Quad Core 1.91 GHz Processor ® Chipset Dual channel 1333 MHz memory bus speed Cache 2 MB L2 cache, 22 nm 4 GB RAM... - Page 32 Technical Data – Device The LCD display of the DLT-V72 series fulfills the highest quality standards and was inspected for pixel defects. However, due to technological reasons pixel defects can occur. This is not a malfunction; it is a part of the technical specifications. NOTICE Prevent system malfunction and property damage The display of the DLT-V72 has to be protected from the burning in...
- Page 33 Technical Data – Device Projected-capacitive touchscreen (PCT) Type Projected-capacitive touchscreen Construction Glass film Surface Hardness JIS-K-5400: > 10 H at 750 g Chemical AR coated glass: DLT-V7210 P and DLT-V7212 P gloss value 85 at 60° DLT-V7210 K, KD and DLT-V7212 P+ gloss value 70 at 60°...
-
Page 34: Environmental Conditions
Technical Data – Device 5.2. Environmental conditions DLT-V72 without integrated UPS Operating temperature -30 to +50 °C Specification according to EN 60068-2-1/2 Storage temperature -30 to +65 °C Specification according to EN 60068-2-1/2 Relative humidity 10% to 90% at 40 °C relative humidity Noncondensing Specification according to EN 60068-2-3 Mechanical vibration... -
Page 35: Device Dimensions
Technical Data – Device 5.3. Device dimensions 5.3.1. DLT-V7210 P, R, D Dimensions without add-ons (in mm) Fig. 5.1: Dimensions DLT-V7210 P, R, D (in mm) 5.3.2. DLT-V7212 P, R, D Dimensions without add-ons (in mm) Fig. 5.2: Dimensions DLT-V7212 P, R, D (in mm) DLT-V72 Series User Manual V2.70 35 / 173... -
Page 36: Dlt-V7210 K, Kd
Technical Data – Device 5.3.3. DLT-V7210 K, KD Dimensions without add-ons (in mm) Fig. 5.3: Dimensions DLT-V7210 K, KD (in mm) 5.3.4. DLT-V7212 P+ Dimensions without add-ons (in mm) Fig. 5.4: Dimensions DLT-V7212 P+ (in mm) DLT-V72 Series User Manual V2.70 36 / 173... -
Page 37: Vesa Drill Holes
Technical Data – Device 5.3.5. VESA drill holes The back of the DLT-V72 has a VESA-compatible 75 x 75 mm mounting hole pattern. It is used to attach VESA-compatible mountings to mount the DLT-V72 at the deployment location. Depth of thread: M6 x 6mm Please observe the mounting information in manual chapter: 12.2.4 VESA mounting hole pattern DLT-V72 Series User Manual V2.70... -
Page 38: Integrated Power Supply, Power Supply Cable
Technical Data – Device 5.4. Integrated power supply, power supply cable DLT-V72 is equipped with a galvanically separated, integrated DC power supply unit. Power is connected to the back of the unit using a Phoenix Contact plug. There is no power switch. -
Page 39: Dc Voltage Supply Connection
Technical Data – Device Power consumption DLT-V7210 (all model types) Typically 25 W; Standby typically 1 W DLT-V7212 (all model types) Typically 30 W; Standby typically 1 W Power supply unit fuses Power supply unit Fuse type Example DC-16 5 x 20 mm T 12,5 A Schurter 0001.2515 H / 250 V Siba 179200.12,5... -
Page 40: Dc Power Supply Cable
Technical Data – Device 5.4.2. DC Power supply cable Fig. 5.7: DC connection cable assignment DLT-V72 Series User Manual V2.70 40 / 173... -
Page 41: Technical Data - Radio
Technical Data – Radio Technical Data – Radio DLT-V72 Series User Manual V2.70 41 / 173... -
Page 42: Identification Of Radio Equipment Variants
Technical Data – Radio 6.1. Identification of radio equipment variants The DLT-V72 offers numerous radio modules for WLAN, WWAN, GNSS and Bluetooth. This radio modules are available as options and are not included in the standard scope of delivery of the DLT-V72 device. To identify the modules installed in your device, proceed as follows: 1. -
Page 43: Radio Cards (Optional)
Technical Data – Radio 6.2. Radio cards (optional) NOTICE Prevent system malfunction and property damage DLT-V72 may only be operated with the radio modules described in the following section. Radio cards are located inside the devices and are not accessible from the outside. Only the manufacturer and its authorized service centers may open the device and install / remove it. -
Page 44: Radio Card For Wwan: Quectel Ec25 A/E
Technical Data – Radio 6.2.2. Radio card for WWAN: QUECTEL EC25 A/E USA: QUECTEL EC25A Europe: QUECTEL EC25E Card type WWAN PCIe Full-Mini Card Technology WWAN 2G, 3G, 4G cellular bands and GNSS FCCID FCC ID: XMR201605EC25A (valid for the EC25-A variant) Class 3 (23dBm±2dB) for LTE FDD Maximum transmitting power... -
Page 45: Antennas (Optional)
Technical Data – Radio 6.3. Antennas (optional) 6.3.1. WLAN antenna IEEE 802.11 a/b/g/n/ac Fig. 6.1: WLAN antenna IEEE 802.11 a/b/g/n/ac Technical data Application WLAN a/b/g/n/ac Dual Band with MRC Bluetooth (integrated via Radio card) WLAN frequency range Band 1: 2400 to 2485 MHz Band 2: 5150 to 5850 MHz Bluetooth features See section 6.3.5 Bluetooth integrated (optional) -
Page 46: Wlan, Wwan, Lte 4G Antenna (Multiband)
Technical Data – Radio 6.3.2. WLAN, WWAN, LTE 4G antenna (Multiband) Fig. 6.2: WLAN, WWAN, LTE 4G antenna (Multiband) Technical data Application WLAN IEEE 802.11 ac/a/b/g/n Dual Band with MRC WWAN 4G Bluetooth 4.2+HS WLAN frequency range Band 1: 2400 to 2485 MHz Band 2: 5150 to 5875 MHz WWAN frequency bands FDD LTE: B1/B3/B5/B7/B8/B20... -
Page 47: External Wlan Antenna Ieee 802.11 A/B/G/N
Technical Data – Radio Compatible WLAN card: SPARKLAN WPEQ-261 ACN (BT) (see section 6.2.1 Radio card) Compatible WWAN card: USA: QUECTEL EC25A Europe: QUECTEL EC25E (see section 6.2.2 Radio card) 6.3.3. External WLAN antenna IEEE 802.11 a/b/g/n Fig. 6.3: External WLAN antenna Technical data Application WLAN IEEE 802.11 a/b/g/n Dual Band... -
Page 48: External Wwan Antenna 2G, 3G, 4G
Technical Data – Radio 6.3.4. External WWAN antenna 2G, 3G, 4G Fig. 6.4: External 2G, 3G, 4G WWAN antenna Technical data Application WWAN 2G, 3G, 4G cellular bands Mounting location For detached mounting, e.g. on the roof of the forklift Number of antennas Type Omnidirectional antenna... -
Page 49: Bluetooth Integrated (Optional)
With the optional GPS receiver the DLT-V72 can be used for GPS navigation. The GPS receiver has an integrated antenna for position data of the Global Positioning System and communicates with the DLT-V72 via USB interface. We recommend using only a GPS receiver approved by Advantech. Fig. 6.5: External GPS receiver (optional) Installation The installation CD supplied with the GPS receiver includes installation files and a multi- lingual manual. -
Page 50: Connectors
Connectors Connectors DLT-V72 Series User Manual V2.70 50 / 173... -
Page 51: Connectors Under The Cable Cover
Connectors 7.1. Connectors under the cable cover Cable cover Connectors located on the connector panel under the cable cover: Fig. 7.1: Connectors on the connector panel under the cable cover Pin assignment description Power supply 12/24/48 VDC nominal 1 x SMA (optional) Remote WWAN antenna 1 x RSMA (optional) Remote WLAN antenna... -
Page 52: Fig. 7.2: Rj45 Network Port
Connectors COM1 as a voltage source The COM1 interface can optionally supply to externally connected equipment with +5 VDC. The voltages are protected by internal fuses and may not exceed a continuous consumed current of 1 A at 5 V. Depending on the connected devices, the maximum current consumption may be significantly lower. -
Page 53: Opening The Cable Cover
Connectors 7.1.1. Opening the cable cover 1. Unscrew the thin headless screws of the cable cover with an Allen wrench, size 2. Carefully remove the cable cover. NOTICE Prevent system malfunction and property damage Improper opening of the cable cover can impair the function of the entire DLT-V72 system. -
Page 54: Connectors Under The Antenna
Connectors 7.2. Connectors under the antenna Antenna Connectors located under the antenna: Service-USB (USB 3.0 Host, SUPERSPEED CFast slot Mini-SIM card slot (optional) 7.2.1. Devices with sealing plate DLT-V72 devices without radio equipment have a sealing plate instead of the radio antenna: Fig. - Page 55 5. To remove the CFast card, carefully push on the card. 6. Use only CFast cards that have been approved by Advantech. 7. The device is only permitted to be operated again once the sealing plate is properly sealed again; only then is the protection class guaranteed.
-
Page 56: Open/Close The Wlan Antenna Ieee 802.11 A/B/G/N/Ac
6. To remove the CFast card, carefully push on the card. 7. Use only CFast cards that have been approved by Advantech. 8. The device is only permitted to be operated again once the antenna is properly sealed again; only then is the protection class guaranteed. -
Page 57: Fig. 7.5: Wlan Antenna Ieee 802.11 A/B/G/N/Ac
Connectors Follow these steps to open antenna “WLAN antenna IEEE 802.11 a/b/g/n/ac”: Tools required: Torx screwdriver, Tx20 Opening the antenna: Fig. 7.5: WLAN antenna IEEE 802.11 a/b/g/n/ac 1. Unfasten both screws on the antenna with a Torx screwdriver, Tx20. 2. -
Page 58: Open/Close The Wlan, Wwan, Lte 4G Antenna
8. To remove the CFast card, carefully push on the card. 9. Use only CFast cards that have been approved by Advantech. 10. The device is only permitted to be operated again once the antenna is properly sealed again; only then is the protection class guaranteed. -
Page 59: Fig. 7.8: Opening The Wlan, Wwan Lte 4G Antenna (Torx Tx20)
Connectors Follow these steps to open antenna type “WLAN, WWAN, LTE 4G”: Tools required: Torx screwdriver, Tx20 Allen key size 7 Step 1: Opening the antenna cap: 1. Unfasten both screws on the antenna cap with a Torx screwdriver, Tx20. 2. -
Page 60: Fig. 7.10: Antenna Module Wlan, Wwan Lte 4G Is Open
Connectors Step 2: Removing the antenna module: 1. Unfasten both screws on the antenna module with an Allen key (size 7) 2. Remove the antenna module extremely carefully. Service USB, CFast and mini SIM card slot are now accessible: Fig. 7.10: Antenna module WLAN, WWAN LTE 4G is open NOTICE Prevent system malfunction and property damage 1. -
Page 61: Operating The Dlt-V72
Operating the DLT-V72 Operating the DLT-V72 DLT-V72 Series User Manual V2.70 61 / 173... -
Page 62: Safety Notes
Operating the DLT-V72 8.1. Safety notes WARNING Personal injury, Property damage and downtimes due to improper operation Users of the DLT-V72 must be trained by skilled personnel and instructed in the operation of the device. All users must be familiar with all functions of the product they come into contact with. -
Page 63: Switching The Dlt-V72 On/Off
Operating the DLT-V72 8.2. Switching the DLT-V72 on/off The following factors determine how the DLT-V72 can be switched on and off: Is the DLT-V72 mounted on a vehicle and connected with the ignition signal? What are the automatic shutdown settings that were defined in the respective ... -
Page 64: Operating The Touchscreen
Operating the DLT-V72 8.3. Operating the touchscreen All touchscreens (Resistive and PCT) can be operated with: Clean, dry fingers Clean, dry gloves Resistive touchscreens can be operated with: Suitable touch stylus plastic or wood, rounded tip PCT touchscreens can be operated with: Suitable touch stylus with capacitive (electrically conductive) tip ... -
Page 65: Operating The Pct With Gloves
8.3.2. Operating the PCT with gloves For PCT touchscreens, you can adjust the touch sensitivity with the ADLoG Config tool. NOTE The “ADLoG Config Manual” is available at our websites: www.advantech.com www.advantech-service-iot.eu DLT-V72 Series User Manual V2.70 65 / 173... -
Page 66: Operation Elements
Operating the DLT-V72 8.4. Operation elements 8.4.1. DLT-V72 rear side DLT-V72 Series User Manual V2.70 66 / 173... -
Page 67: Front Side Dlt-V7210 And Dlt-V7212: P, R, D
Operating the DLT-V72 8.4.2. Front side DLT-V7210 and DLT-V7212: P, R, D Note on the backlighting function on/off: The DLT-V72 will continue to react to keyboard, mouse and touchscreen inputs even if the backlight is switched off. DLT-V72 Series User Manual V2.70 67 / 173... -
Page 68: Front Side Dlt-V7212 P
Operating the DLT-V72 8.4.3. Front side DLT-V7212 P+ DLT-V72 Series User Manual V2.70 68 / 173... -
Page 69: Front Side Dlt-V7210 K, Kd
Operating the DLT-V72 8.4.4. Front side DLT-V7210 K, KD Note on the backlighting function on/off: The DLT-V72 will continue to react to keyboard, mouse and touchscreen inputs even if the backlight is switched off. DLT-V72 Series User Manual V2.70 69 / 173... -
Page 70: Using The Integrated Keyboard
Operating the DLT-V72 8.5. Using the integrated keyboard 8.5.1. Language variants Device model Languages available English DLT-V7210 K German French English DLT-V7210 KD Example English version (QWERTY): Fig. 8.1: Integrated keyboard English (QWERTY) 8.5.2. Description of specific keys (in all languages) General Function Caps Lock: permanent switch to uppercase letters... -
Page 71: Integrated Keyboard German (Qwertz) Features
Operating the DLT-V72 Sticky key function for one-hand operation Modifier Key Operation mode on the DLT-V72 When you press a modifier key (SHIFT, CTRL, and ALT) on the DLT-V72 keyboard, this key is active for the duration of 4 seconds. This facilitates inputting key combinations with one hand. -
Page 72: Integrated Keyboard French (Azerty) Features
Operating the DLT-V72 8.5.4. Integrated keyboard French (AZERTY) features Fig. 8.3: Integrated keyboard French (AZERTY) Special characters French: Character Press the keys successively: Æ ALT + 146 æ ALT + 145 Ç FN + C or ALT + 128 É FN + J or ALT + 144 Œ... -
Page 73: Operating States
Operating the DLT-V72 8.6. Operating states LED status DLT-V72 status Supply voltage Temperature Initial state, idle time – waiting for a new ignition signal or for the POWER button after switch-off; no voltage supply FLASHING Temperature sensor faulty FLASHING DLT-V72 is in standby mode (S3) Computer will only start if the temperature in the device is in the range between -30 and +59 °C again. -
Page 74: Software Keyboard (Optional)
Example for a software keyboard (the layout can be configured individually): Fig. 8.4: Software keyboard If the software keyboard was ordered together with the DLT-V72 industrial PC, then the program will have been fully pre-licensed by the Advantech production department. For subsequent installation, an installation program is available. NOTE The “DLoG software keyboard manual”... -
Page 75: Operating The Dlt-V72 With Ups
Operating the DLT-V72 8.8. Operating the DLT-V72 with UPS The DLT-V72 is optionally available with an integrated UPS. The battery pack of the UPS is located in the battery pocket of the device: Fig. 8.5: Battery pocket with UPS DLT-V72 WARNING Personal injury due to short-circuit, fire, chemical burns, toxic substances. -
Page 76: Internal Speaker, Sound
Operating the DLT-V72 8.9. Internal speaker, sound The DLT-V72 is equipped with an internal speaker as standard (2 W). The system messages from the industrial PC are output via this speaker. The internal speaker is configured in the audio settings for the operating system in question. DLT-V72 Series User Manual V2.70 76 / 173... -
Page 77: General Device Configuration
General Device Configuration General Device Configuration DLT-V72 Series User Manual V2.70 77 / 173... -
Page 78: Operating Systems (Optional)
General Device Configuration 9.1. Operating systems (optional) NOTE Please find the latest overview of all supported operating systems in the DLT-V72 data sheets at our websites. The following operating systems are available at the time of manual creation, Nov 2019: MS Windows 10 IoT Enterprise (Win10IoTEnt) ... -
Page 79: Configuring The Front Keys, Automatic Shutdown, Etc
General Device Configuration 9.2.2. Configuring the front keys, automatic shutdown, etc. The DLoG Config software is used to configure DLT-V72 devices with a MS Windows operating system. For configuring DLT-V72, the DLoG Config version 5.0 or higher is required. Configuration examples: Automatic shut down ... -
Page 80: Suppress Automatic Win10Iotent Updates
General Device Configuration 9.2.4. Suppress automatic Win10IoTEnt updates Under Win10IoTEnt, the automatic Windows updates can no longer be deactivated; the Never check for updates setting in the Windows Update dialog is not available. With the following entry in the Windows registry, the Never check for updates setting can be set anyway: 1. -
Page 81: Linux (Optional)
9.3. Linux (optional) NOTE The configuration of the DLT-V72 with Linux with regard to radio networks, touchscreen calibration, etc. is described in the “Advantech Linux Manual”. Please contact our Technical Customer Support if required. 9.4. ADLoG Android (optional) NOTE The configuration of the DLT-V72 with Android with regard to radio networks, touchscreen calibration, etc. -
Page 82: Automatic Shut Down
General Device Configuration 9.5. Automatic shut down Functional description The DLT-V72 is equipped with an automatic shutdown module. If wired up accordingly, the DLT-V72 conveniently switches off together with the vehicle’s ignition. As disconnecting the power supply during operation can lead to data loss, the operating system needs to be shut down normally using the appropriate hardware and software installed on the system when the ignition is switched off. - Page 83 General Device Configuration Device shut down If the operating system is shut down, all applications will be notified via the Windows message “WM_QUERYENDSESSION” first. Every application must then respond within the time set in the registry. If there is no response within the preset time, the application will be hard-terminated.
-
Page 84: Wlan Configuration
WLAN Configuration 10. WLAN Configuration DLT-V72 Series User Manual V2.70 84 / 173... -
Page 85: Safety Notes
WLAN Configuration 10.1. Safety notes CAUTION Danger of radiation. DLT-V72 devices with radio technology emit high frequency energy (abbreviation: HF). To protect persons and domestic animals against HF radiation: 1. Observe section 2.4 HF Radiation in the Safety Chapter of this manual. -
Page 86: Preparation Work At The Factory
WLAN Configuration Antenna solutions for use in Germany The Advantech antenna solutions are based on the prevailing IEEE 802.11 standard. This standard allows radio data transfer at rates from 1 Mbps to 54 Mbps (867 Mbit/s if using IEEE 802.11ac) using the 2.4 GHz and 5 GHz frequency band. -
Page 87: Os-Specific Configuration
WLAN configuration description DLT-V72 with MS-Windows In the following manual sections DLT-V72 with Linux In manual “Advantech Linux“; please contact our Technical Customer Support if required. DLT-V72 with Android In manual “Android Nougat 1.xx for DLT-V72” available at Nougat 1.xx for DLT-V72 our websites DLT-V72 Series User Manual V2.70... -
Page 88: Customer-Specific Wlan Profiles
1. Use the configuration program that is already factory-installed on the DLT- V72. 2. Observe the description of the configuration programs in the following sections. Radio card Configuration program Qualcomm Atheros Advantech WLAN Client Manager (IGX Tool) QCA61x4A Wireless Password: gold Network Adapter Windows Wireless Zero Configuration... -
Page 89: Advantech Wlan Client Manager (Igx Tool)
WLAN Configuration 10.6. Advantech WLAN Client Manager (IGX Tool) 10.6.1. Area of application This chapter describes the Advantech WLAN Client Manager version 1.01 under the following OS: Win7Pro WES7 Win10IoTEnt Required: DLT-V72 with radio card SPARKLAN WPEQ-261ACN (BT) MiniPCIe 10.6.2. -
Page 90: After Image Reinstallation: Driver Installation
WLAN Configuration 10.6.4. After image reinstallation: Driver installation If the image has been reinstalled, the DLT-V72 must be set up again using the IGX WLAN driver. Two drivers are available: Driver for Win7Pro and WES7 Driver for Win10IoTEnt 10.6.5. -
Page 91: Fig.10.3: Igx Driver Installation Welcome Dialog
WLAN Configuration If the C++ executables / runtimes required for the installation are missing on the operating system, these must be set up before running the WLAN driver installation. Respond to the relevant prompt in the installation workflow. Using latest available ADLoG Windows standard images released 2019 C++ executable are installed already. -
Page 92: Fig.10.5: Igx Driver Installation All Program Features
WLAN Configuration 4. In this dialog, enter a username and a company name and confirm with Next. Fig.10.5: IGX driver installation All program features 5. Leave the Complete option enabled. 6. Continue the installation with Next. Fig.10.6: IGX driver installation starts 7. -
Page 93: Fig.10.7: Igx Driver Installation Exit With Finish
WLAN Configuration Fig.10.7: IGX driver installation Exit with Finish 8. Exit the driver installation with Finish. 9. It is recommended to run the required system re-start directly following installation. 10. Select Yes, I want to restart my computer now. 11. Press the Finish button. The system re-start is carried out. -
Page 94: Silent" Driver Installation Win7Pro, Win10Iotent
WLAN Configuration 10.6.6. “Silent” Driver installation Win7Pro, Win10IoTEnt 1. Open the corresponding installation directory depending on the operating system. 2. Run “Silent_Install.bat” to start the installation. The installation process will be done automatically in background. At the end of process, no dialog will be shown to user and system restart is required. -
Page 95: Start Wlan Client Manager, Login
WLAN Configuration 10.6.8. Start WLAN Client Manager, Login 1. Launch the WLAN Client Manager by double-clicking the Launch WCU icon: Fig.10.9: WCU icon on the desktop You must login as "WCU_Administrator" first. DLT-V72 Series User Manual V2.70 95 / 173... -
Page 96: Fig.10.10: Wcu Main Window, Admin Login
WLAN Configuration 2. To do this, click Admin Login. Fig.10.10: WCU main window, Admin Login 3. Then open the login window. 4. Enter the passport, which by default is "gold". 5. Confirm the input with the Login button. DLT-V72 Series User Manual V2.70 96 / 173... -
Page 97: Fig.10.11: Wcu-Administrator Login Window
WLAN Configuration Fig.10.11: WCU-Administrator login window After successful Admin-login, speed buttons for managing profiles are available: Fig.10.12: Speed buttons for managing profiles DLT-V72 Series User Manual V2.70 97 / 173... -
Page 98: Wlan Client Manager Functions
WLAN Configuration 10.6.9. WLAN Client Manager Functions License The License function lists the current status of the enabled options: Fig.10.13: Check License NOTE The correct implementation of the WLAN driver requires a valid license in combination with the DLT-V72 terminal. DLT-V72 Series User Manual V2.70 98 / 173... -
Page 99: Browse Nearby Wireless Networks
WLAN Configuration If, as shown in the image, the license information is missing: Contact technical customer support to solve the problem. Fig.10.14: Info display via existing license 10.6.10. Browse nearby wireless networks Set up the WLAN connection To set up a WLAN connection, you can show all available networks using the Browse nearby wireless networks function. -
Page 100: Fig.10.16: Advanced Security Settings Dialog
WLAN Configuration Define security settings The security settings must be selected (depending on the network). These settings can be made in the Advanced Security Settings section: Fig.10.16: Advanced Security Settings dialog To be able to connect with the network automatically, set the checkmark to connect automatically when the network is in range: Fig.10.17: Connection when the network is in range dialog DLT-V72 Series User Manual V2.70... - Page 101 WLAN Configuration Available parameters in the Connection and Security sections: Connect automatically when Enable this parameter to set up an automatic the network is in range connection to the network. Connect to a more preferred In the event of multiple profiles being present, this network if available option can be used to select the preferred profile.
-
Page 102: Fig.10.18: Security Settings - Network Authentication Methods
WLAN Configuration Fig.10.18: Security settings - network authentication methods The network authentication methods shown, as well as their designations, differ depending on the operating system used. For the remaining settings as in the case shown above (Cisco: Leap), the required additional parameters are carried out using the two buttons Settings and Advanced settings. -
Page 103: Fig.10.20: Security Settings - Leap Properties
WLAN Configuration Fig.10.20: Security settings – LEAP properties 2. Lastly, the network key must be entered in the following example (WPA2- Personal) (Network Security Key). 3. Confirm the settings with OK. Fig.10.21: Wireless Network properties dialog DLT-V72 Series User Manual V2.70 103 / 173... -
Page 104: Fig.10.22: Create New Profile Dialog
WLAN Configuration Fig.10.22: Create new profile dialog 4. Confirm the new profile with the OK button. DLT-V72 Series User Manual V2.70 104 / 173... -
Page 105: Fig.10.23: Network Connection Is Established
WLAN Configuration Establish network connection After the WLAN profile settings have been made, a connection to the network is established automatically. The connection setup with the selected network is successful only if the "green" connection line is displayed in the WCU main window. Fig.10.23: Network connection is established DLT-V72 Series User Manual V2.70 105 / 173... -
Page 106: Roam Management
WLAN Configuration 10.6.11. Roam Management General tab After clicking the General dialog, the following information is displayed on the screen: Fig.10.24: General dialog in the Roam Management menu Info section Info Meaning of the display Client Status Current connection status: Connected / Disconnected Network Name SSID SSID of the currently connected access points Network Type... -
Page 107: Fig.10.25: Roaming Dialog In The Roam Management Menu
WLAN Configuration Security section Authentication The authentication process used, e.g. WPA2-PSK (Pre-Shared- Key) Encryption Display of the corresponding encryption process, e.g. (AES-CCMP, TKIP) Roaming tab The Roaming dialog is used to define the following parameters: Fig.10.25: Roaming dialog in the Roam Management menu DLT-V72 Series User Manual V2.70 107 / 173... - Page 108 WLAN Configuration Roam section Signal Level The client decides to roam only when the current signal strength is weaker than the setting value and the new visible access point has higher signal (dBm): strength (defined in Roam RSSI Difference).Possible values: -55 dBm to - 80 dBm Default value: -65 dBm (adjustable in 5 dBm increments) Minimum...
-
Page 109: Fig.10.26: Roam Management - Choose Band And Channels
WLAN Configuration Background Scan section Signal Level The client begins the background scan only when the current signal (dBm) strength is weaker than the setting value. Possible values: -55 dBm to -80 dBm Default value: -65 dBm Probe request This setting is used to define how frequently the probes are to be sent interval when the client is in the "Connected"... - Page 110 WLAN Configuration Channel List Select all This option can be used for simultaneous pre-selection of all 2.4 GHZ 2.4Ghz channels 1 to 13 supported by the WLAN driver. channels Modifications to individual channels can be carried out at any time by clicking the checkboxes for each channel.
-
Page 111: Fig.10.27: Radio Dialog In The Roam Management Menu
WLAN Configuration Radio Tab The Radio dialog is used to define the following parameters: Fig.10.27: Radio dialog in the Roam Management menu Power Save The Power Save Level is set. The levels OFF and Auto-PSM are available. Mode Selection The client’s band is specified. The possible options are: 11n and 11ac, 11n, 11a/b/g DLT-V72 Series User Manual V2.70 111 / 173... -
Page 112: Fig.10.28: Adapter Tab In Roam Management Menu
WLAN Configuration Adapter Tab After clicking the Adapter dialog, the following information is displayed on the screen: Fig.10.28: Adapter Tab in Roam Management menu DLT-V72 Series User Manual V2.70 112 / 173... -
Page 113: Import / Export Feature
WLAN Configuration 10.6.12. Import / Export feature This feature in program version 1.01 (or higher) allows export and import of configured WLAN profiles and settings. The “OutputFile.txt” contains the following saved information: Roam parameters: Roam RSSI difference, Signal Level, Min Connection Time ... -
Page 114: Fig.10.30: Wlan Client Manager - Import/Export Dialog
WLAN Configuration The following dialog will be shown: Fig.10.30: WLAN Client Manager - Import/Export dialog Choose Export Profiles to create an “OutputFile.txt” using standard windows directory dialog for free selectable file location: Fig.10.31: WLAN Client Manager - Export Profiles in OutputFile.txt DLT-V72 Series User Manual V2.70 114 / 173... -
Page 115: Fig.10.32: Wlan Client Manager - Info Box Profiles Exported
WLAN Configuration With button Save “OutputFile.txt” will be generated followed by message: Fig.10.32: WLAN Client Manager - Info box Profiles exported Import process requires afterwards to select an existing “OutputFile.txt”: Fig.10.33: WLAN Client Manager - Select an existing “OutputFile.txt” By clicking Open button the file will be imported (existing setup will be overwritten during this process!) Fig.10.34: WLAN Client Manager - Info box Profiles imported DLT-V72 Series User Manual V2.70... -
Page 116: Fig.10.35: Start „Auto" Import Of A Wlan Settings File
WLAN Configuration “Auto” Import wireless settings file as part of “silent” driver installation This option is useful for multiple installation scenarios to skip the graphical dialog that requires admin login to import the wireless setting automatically as part of “silent” driver installation process. -
Page 117: Fig.10.36: Successful „Auto" Import Of A Wlan Settings File
WLAN Configuration After the required reboot the wireless connection will be set up automatically based on imported settings: Fig.10.36: Successful „Auto” Import of a WLAN settings file DLT-V72 Series User Manual V2.70 117 / 173... -
Page 118: Wwan Configuration
WWAN Configuration 11. WWAN Configuration DLT-V72 Series User Manual V2.70 118 / 173... -
Page 119: Safety Notes
WWAN Configuration 11.1. Safety notes CAUTION Danger of radiation. DLT-V72 devices with radio technology emit high frequency energy (abbreviation: HF). To protect persons and domestic animals against HF radiation: 1. Observe section 2.4 HF Radiation in the Safety Chapter of this manual. -
Page 120: Preparation Work At The Factory (Delivery Status)
WWAN Configuration 11.2. Preparation work at the factory (delivery status) The following preparations have already been carried out at the factory for the optional WWAN functionality of the DLT-V72: The WWAN radio card and the corresponding drivers are installed. GNSS is enabled at the factory ... -
Page 121: Configuration Of Radio Card Quectel Ec25
WWAN Configuration 11.4. Configuration of Radio card QUECTEL EC25 The following information is valid for the radio card QUECTEL EC25. Its precise designation is: USA: QUECTEL EC25A or EC25V Europe: QUECTEL EC25E The WWAN configuration is identical for both radio cards. For this reason, the abbreviation QUECTEL EC25 is used. -
Page 122: Fig. 11.3: Quectel Ec25 - Connect To The Internet - Dial-Up
WWAN Configuration 4. Click Dial-up. Fig. 11.3: QUECTEL EC25 - Connect to the Internet - Dial-up 5. Specify as a telephone number, e.g. *99***1#. 6. Enter a connection name, e.g. Vodafone test connection. Username and password are not required in the example. (Provider-dependent) Fig. -
Page 123: Fig. 11.6: Quectel Ec25 - Dial Vodafone Test Connection
WWAN Configuration 8. Do not enter a user name or password. 9. Click Dial. The test connection is established. Fig. 11.6: QUECTEL EC25 - Dial Vodafone test connection In the Network and activation center of the device, the status of the test connection can be tested: 10. -
Page 124: Trouble Shooting
WWAN Configuration 11.4.2. Trouble Shooting Test virtual COM ports In the device manager it is possible to test that the virtual COM ports are correctly set. If they are not correctly set, they must be modified as appropriate. The virtual COM ports must be set up as shown in the figure: Fig. -
Page 125: Fig. 11.9: Quectel Ec25 - Test Nmea Data Flows
WWAN Configuration Test communication between DLT-V72 and WWAN Radio card The open source software Tera Term, for example, can be used to test that the DLT- V72 can communicate with the Radio card. This software can be downloaded from the following URL, for example (website available at time of writing this operating manual, dated May 2019): https://www.heise.de/download/product/tera-term-51776 Perform the following steps:... -
Page 126: Mechanical Installation
Mechanical Installation 12. Mechanical Installation DLT-V72 Series User Manual V2.70 126 / 173... -
Page 127: Safety Notes
Mechanical Installation 12.1. Safety notes WARNING Risk of personal injury and property damage due to improper mechanical installation. These mounting instruction are directed to skilled personnel. Only qualified skilled personnel may perform the mechanical installation work on the DLT-V72. 1. Observe manual section 2.5 Information on safe mounting. NOTICE Prevent system malfunction and property damage The front display of the DLT-V72 is protected during transport by a... -
Page 128: Mounting The Dlt-V72 At The Deployment Location
Mechanical Installation 12.2.1. Mounting the DLT-V72 at the deployment location WARNING Risk of injury and damage due to improper deployment location. 1. Observe the intended use of the DLT-V72, e.g. not in potentially explosive areas, not in life-supporting facilities. 2. Ensure that the deployment location of the DLT-V72 complies with the permissible environmental conditions. -
Page 129: Electrically Isolated Dlt-V72 Mounting
Mechanical Installation 12.2.2. Electrically isolated DLT-V72 mounting Due to a variety of technical properties of forklifts and forklift trucks, it can be necessary to electrically isolate DLT-V72 from the chassis of the vehicle to prevent malfunctions. The necessity of this must be studied on a case-by-case basis, however, it is recommended for vehicles with potential-free chassis. -
Page 130: Attaching Accessories To The Dlt-V72
Only use mounting brackets, accessories and mounting materials that have been tested and approved for the respective DLT-V72. All mounting brackets, accessories and mounting materials supplied by Advantech are only intended to be used for attachment of the Advantech Industrial Computers and the peripheral devices and may not be misused. DANGER Risk of accident during vehicle operation if the mounting of the DLT-V72 becomes loose and breaks while driving. -
Page 131: Vesa Mounting Hole Pattern
Mechanical Installation 12.2.4. VESA mounting hole pattern The rear side of the DLT-V72 has a VESA-compatible mounting hole pattern with 75 x 75 mm for a RAM Mount bracket or swivel mounting. Screw-in depth VESA mounting hole pattern: M6 x 6 mm ... -
Page 132: Attach The Mounting Bracket
Mechanical Installation 12.2.5. Attach the mounting bracket The DLT-V72 housing has holes provided for attaching a mounting bracket. Fig. 12.2: Mounting bracket on the DLT-V72 4 x cylinder head screws DIN912 M6 Screw-in depth: M6 x 6 mm Washers DIN 125 - A 6.4 ... -
Page 133: Attach Accessories
Mechanical Installation 12.2.6. Attach accessories The housing of the DLT-V72 has holes provided for attaching an accessory. Example: Fig. 12.3: Scanner mounting attachment Screw-in depth: M6 x 6 mm Suitable mounting material: Cylinder head screw DIN 912 M6 Washer ISO 8738 - A6-A2 ... -
Page 134: Electrical Installation
Electrical Installation 13. Electrical Installation DLT-V72 Series User Manual V2.70 134 / 173... -
Page 135: Safety Notes
Electrical Installation 13.1. Safety notes 13.1.1. Disconnecting device and emergency-off WARNING Risk of personal injury and property damage due to improper electrical installation. These mounting instruction are directed to skilled personnel. Only qualified skilled personnel may perform the electrical installation work on the DLT-V72. -
Page 136: Power Cables And Fuses
WARNING Electric shock, fire due to incorrect cable routing or insufficient grounding. 1. Use only original Advantech power cables; these meet the specific requirements for low-temperature flexibility, UV resistance, oil resistance, etc. 2. Make sure that the power supply cables are run without kinks and are protected (securely protected against crushing and abrading). -
Page 137: Observe The Potential Ratios
Electrical Installation 13.1.3. Observe the potential ratios On the DLT-V72, the logic ground and the shield ground are firmly connected to each other. Logic ground is the ground (GND) used to supply the internal parts and components such as the display or CPU. All cable shields and the housing are connected to shield ground. -
Page 138: Preparations
Electrical Installation 13.2. Preparations 1. Lay out ready all cables that are to be connected to the DLT-V72. 2. Select the appropriate slots on the connector panel of the DLT-V72. 3. Test in which order the cables best fit in the cable compartment. Overview of connectors located on the connector panel under the cable cover: Fig. -
Page 139: Fig. 13.3: Dlt-V72 Cable Cover With Screws
Electrical Installation Cable cover Including 2 x special screws M4x12, neck 8 mm, thread length 4 mm, (latching in the holes of the cable cover) Fig. 13.3: DLT-V72 cable cover with screws Power supply cable DC power supply cable with Phoenix contact connector Tools Allen wrench, size 3 ... -
Page 140: Procedure
Electrical Installation 13.3. Procedure 13.3.1. Inserting the rubber seal in the cable compartment 1. Insert the rubber seal in the cable compartment. 2. Place the rubber seal in the frame of the cable compartment (see figure). 3. Press the plugs of the rubber seal into the holes of the frame. Fig. -
Page 141: Ensure A Proper Electrical Connection
Electrical Installation 13.3.2. Ensure a proper electrical connection 1. Remove the nut from the ground bolt. 2. The toothed washer remains on the ground bolt. 3. Plug the ring tongue on the power supply cable onto the ground bolt; the flat side of the ring tongue points towards the DLT-V72 connector panel. -
Page 142: Secure The Power Supply Cable To The Strain Relief Rail
Electrical Installation 13.3.4. Secure the power supply cable to the strain relief rail Mounting screws 1. Open the round cable passage in the rubber seal. 2. Insert the power supply cable. 3. Place one cable clip on the power supply cable. -
Page 143: Connecting The Usb, Ethernet And Com Cables
Electrical Installation 13.3.5. Connecting the USB, Ethernet and COM cables Procedure as described for the power supply cable: 1. Connect the cable. 2. Open the round cable passage in the rubber seal. 3. Insert the cable. 4. Insert both components into the cable passage. 5. -
Page 144: Close Off Unused Cable Openings
Electrical Installation 13.3.6. Close off unused cable openings Close off all unused cable openings of the rubber seal using the accompanying blind plugs so that they are sealed. 13.3.7. Attach the cable cover 1. Place the cable cover in the DLT-V72 housing slot. 2. -
Page 145: Pressure Compensation Element
Electrical Installation 13.4. Pressure compensation element The DLT-V72 cable cover has a pressure compensation element. NOTICE Prevent system malfunction and property damage Do not modify or remove the pressure compensation element; doing so would make the device leak and the IP protection would no longer be ensured. -
Page 146: Optional Equipment
Optional Equipment 14. Optional Equipment DLT-V72 Series User Manual V2.70 146 / 173... -
Page 147: Integrated Ups (Optional)
Optional Equipment 14.1. Integrated UPS (optional) The DLT-V72 is optionally available with an integrated UPS. The battery pack of the UPS is located in the battery pocket of the device. Fig. 14.1: Battery pocket with UPS DLT-V72 WARNING Personal injury due to short-circuit, fire, chemical burns, toxic substances DLT-V72 devices with integrated UPS contain battery packs. -
Page 148: Charging The Battery Pack
Optional Equipment 14.1.2. Charging the battery pack Connect the properly installed DLT-V72 to the main supply voltage. WARNING Electric shock when charging the battery pack DLT-V72 devices with integrated UPS contain battery packs. These can ignite if handled or stored improperly (risk of fire), cause chemical burns or release toxic substances. -
Page 149: Replacing The Battery Pack
1. Use only original Advantech battery packs. 2. The battery packs must be authorized/approved for the DLT- V72. 3. Do not use battery packs from any other Advantech devices; they are not compatible. 4. If battery packs from other manufacturers are inserted in the DLT-V72, the warranty provided by Advantech for this device will be rendered void. -
Page 150: Screen Defroster (Optional)
Optional Equipment 14.2. Screen defroster (optional) Some DLT-V72 models are optionally available with a screen defroster (containing “D” in the model name, e.g. “DLT-V7210 D”. Functional description As soon as the internal temperature of the DLT-V72 device falls below 5°C, the screen defroster is automatically activated and heats the front of the device. -
Page 151: Screen Blanking (Optional)
The “DLT-SA6100 Screen Blanking Solution Manual” is available at our websites. 14.4. USB recovery stick (optional) The optional Advantech recovery stick allows images to be backed up and restored onto the DLT-V72 when necessary (backup & recovery). NOTE The “ADLoG USB Recovery Stick Manual” is available at our websites. -
Page 152: Keyboards And Keyboard Mounts (Optional)
Optional Equipment 14.5. Keyboards and keyboard mounts (optional) Any USB keyboard can be connected to the DLT-V72. Advantech offers the following keyboards: SMALL keyboard 1. Mountable 2. Protection class IP65 3. Keyboard layouts: German, English, French Fig. 14.3: SMALL keyboard... -
Page 153: Scanner And Scanner Bracket (Optional)
You can connect scanners to either the USB interface or the serial interface. If connected to COM1, the scanner can be powered through the interface with a voltage of 5 V. Use only scanners that have been approved by Advantech. Optional scanner brackets are available for the DLT-V72. -
Page 154: Touch Stylus (Optional)
Optional Equipment 14.7. Touch stylus (optional) Advantech offers some touch stylus pens (with associated mountings) for resistive and PCT touchscreens. Use only touch stylus that have been approved by Advantech. Touch stylus with mounting Touch stylus with mounting for resistive touchscreen: for PCT touchscreen: Fig. -
Page 155: Protective Film For Touchscreen (Optional)
Optional Equipment 14.8. Protective film for touchscreen (optional) An optional protective film is available for DLT-V72 touchscreens. This film protects the touchscreen during extreme use. NOTICE Prevent system malfunction and property damage Do not attach the protective film to damaged or worn out touchscreens. -
Page 156: Repairs, Modifications
Repairs, Modifications 15. Repairs, Modifications DLT-V72 Series User Manual V2.70 156 / 173... -
Page 157: Authorized Advantech Service Centers
Accessories and peripherals Accessories and peripherals may only be installed or integrated if expressly approved by Advantech for the respective DLT-V72. If other parts are attached or installed and connected, claims for warranty and / or product liability will be lost. -
Page 158: Maintenance
Maintenance 16. Maintenance DLT-V72 Series User Manual V2.70 158 / 173... -
Page 159: Regular Maintenance Work
Maintenance 16.1. Regular maintenance work 16.1.1. General To avoid damage to the DLT-V72 and to ensure safe functioning: Depending on the load and environmental conditions, check at least once per month, and more often if necessary, that all connected cables are secured and that the cable cover is tightly sealed (important for IP protection against dust, etc.). -
Page 160: Replacing The Integrated Keyboard
Maintenance 16.2. Replacing the integrated keyboard If necessary, the integrated keyboard of the DLT-V7210 K and DLT-V7210 KD can be removed and replaced by a new keyboard (only by skilled personnel). WARNING Hazardous voltage, electric shock from contact with live parts. To prevent an electric shock: 1. -
Page 161: Attach The Integrated Keyboard (Example)
Maintenance 16.2.2. Attach the integrated keyboard (example) Reuse the black keyboard grid. New, replacement parts: Silicon keyboard mat 5 x screws ISO14580-m3x8 A2 Fig. 16.2: Integrated keyboard: Keyboard components Procedure 1. Place the silicon keyboard mat on the circuit board. Fig. -
Page 162: Fig. 16.4: Integrated Keyboard: Silicone Keypad
Maintenance 2. Carefully press the 3 nubs on the back of the silicone keypad into the openings provided on the circuit board. Fig. 16.4: Integrated keyboard: Silicone keypad 3. Place on the keyboard grid at a 45° angle, see Fig. 16.5. Fig. -
Page 163: Replacing The Battery Pack
Maintenance 16.3. Replacing the battery pack See manual section 14.1 Integrated UPS (optional) . 16.4. Replacing the touchscreen protective film NOTICE Prevent system malfunction and property damage Do not attach the protective film to damaged or worn out touchscreens. Air bubbles can get trapped and cause malfunctions. The ordered optional protective film is normally attached to the DLT-V72 touchscreen at the factory. -
Page 164: Troubleshooting
Troubleshooting 17. Troubleshooting DLT-V72 Series User Manual V2.70 164 / 173... - Page 165 Replace the battery pack. Use only original battery pack from Advantech. No UPS functionality Battery pack is Charge the battery pack although battery pack is discharged or deep properly.
- Page 166 Troubleshooting operating system default setting, which can result in poorer detection of taps on the screen. You can use Reset to reset the software recalibration. External boot media lock Remove all external storage Operating system does not start Operating system Operating system or image damage must be reinstalled...
-
Page 167: Guidelines And Certificates
Guidelines and Certificates 18. Guidelines and Certificates DLT-V72 Series User Manual V2.70 167 / 173... -
Page 168: Usa/Canada: Fcc Part 15 Statement
Guidelines and Certificates 18.1. USA/CANADA: FCC Part 15 Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 169: Ices Kanada
Guidelines and Certificates 18.2. ICES Kanada Deutsch [German]: DLT-V72 Industrie-PCs sind digitale Geräte der Klasse A und entsprechen der Kanadischen ICES-003 Norm. English: This Class A digital apparatus complies with Canadian ICES- 003. Français [French]: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. -
Page 170: List Of Figures
List of figures 19. List of figures DLT-V72 Series User Manual V2.70 170 / 173... - Page 171 List of figures Fig. 2.1: Battery pocket with UPS DLT-V72 ..............17 Fig. 2.2: Recycling information icons................23 Fig. 5.1: Dimensions DLT-V7210 P, R, D (in mm) ............35 Fig. 5.2: Dimensions DLT-V7212 P, R, D (in mm) ............35 Fig.
- Page 172 List of figures Fig.10.18: Security settings - network authentication methods ........102 Fig.10.19: Security settings – Advanced settings (Cisco: Leap) ........ 102 Fig.10.20: Security settings – LEAP properties ............103 Fig.10.21: Wireless Network properties dialog ............103 Fig.10.22: Create new profile dialog................104 Fig.10.23: Network connection is established ............
- Page 173 DLT-V72 Series User Manual V2.70 173 / 173...