PREPARING FOR TREATMENT
Installing the bottles
Always check the condition of the bottle cap
O-ring before installing the bottle. Please refer to
the chapter "Maintenance".
Use the graduations provided on the
bottles to adjust the quantity of the solution for
the treatment.
Install one or two bottle(s) using a rotating
movement until it reaches the stop.
12
FB-430_4_rev_C_PIEZON MASTER 700.indd 12
FB-430_4_rev_C_PIEZON MASTER 700.indd 12
PRIPREMA ZA TRETMAN
Instaliranje bočica
Uvijek provjerite stanje O-prstena na čepu
bočice prije instaliranja bočice. Molimo pročitajte
poglavlje "Održavanje".
Koristite skalu prikazanu na bočicama da
biste prilagodili količinu otopine za tretman.
Instalirajte jednu ili dvije bočice rotirajućim
pokretom dok ne dođe do graničnika.
VOORBEREIDEN VOOR
BEHANDELING
Installeren van de flessen
Controleer altijd de toestand van de O-ring
van de flesdop voordat u de fles installeert.
Raadpleeg het hoofdstuk "Onderhoud"
Gebruik de schaalindeling op de flessen om
de hoeveelheid van de oplossing die benodigd is
voor de behandeling af te meten.
Installeer een of twee fles(sen) met een draaibe-
weging totdat het stoppunt bereikt is.
05/02/2020 08:52
05/02/2020 08:52