Mount The Autoboom® Xrt Valve - Raven AutoBoom XRT Installation Manual

MOUNT THE AUTOBOOM® XRT VALVE
1. Secure the AutoBoom XRT valve (P/N 334-0235-001) to the mounting bracket (P/N 107-0235-011) using four
5/16" hex bolts and four 5/16" lock washers.
FIGURE 7. XRT Valve Mounting Location
NOTE: For model year 2020 and newer 132' and 135' aluminum booms, the AutoBoom valve may be
mounted to the existing plate where the REM ECU will be mounted.
Mount the AutoBoom valve so that Port P is facing up and LC and RC Ports are facing the center of
the machine.
FIGURE 8. AutoBoom XRT Valve Mounted on the Sprayer
016-0236-001 Rev. E
P
LC
RC
HYDRAULIC SYSTEM INSTALLATION
XRT Valve
Mounting
Location
15