Proximity Sensor - Raven AutoBoom XRT Installation Manual

C 4
HAPTER

PROXIMITY SENSOR

NOTE: The following steps are not required for machines with 120', 132', and 135' boom configurations.
1. Install proximity sensors in the location shown in Figure 23 on page 40 (right side shown).
FIGURE 23. Proximity Sensor Mounting Location
2. Attach the proximity sensors to the existing bracket using a spacer and the M6 hardware provided (see
Figure 24 on page 40).
FIGURE 24. Proximity Sensor Mounting
40 AutoBoom® XRT Installation Manual for Case IH Patriot 3xx0/44x0 and Trident 5550 (MY 2017-2021)
Proximity
Sensor
Spacer
Existing
Bracket
Proximity
Sensor