Install Fittings On The Autoboom Valve; Mount The Autoboom Valve - Raven AutoBoom Willmar Eagle 8500 Installation Manual

Install Fittings on the AutoBoom Valve

Before mounting the AutoBoom valve on the machine, install the proper fittings in the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following
table to install the fittings in the appropriate ports of the AutoBoom valve.
Fitting - 9/16" JIC (M) to 9/16" SAE O-Ring (M) Straight Adapter
Fitting - 3/4" SAE O-Ring (M) to 3/4" JIC (M) Straight Adapter
Fitting - 3/4" Hex Plug

Mount the AutoBoom Valve

AutoBoom Valve Mounted on the Valve Mounting Plate
FIGURE 4.
Secure the AutoBoom valve (P/N 063-0131-127) to the valve mounting plate (P/N 107-0171-619) using four
1.
5/16"-18 x 7/8" hex bolts (P/N 311-0052-104) and four 5/16" lock washers (P/N 313-1000-019).
AutoBoom Valve Mounted on the Machine
FIGURE 5.
Secure the mounting plate to the machine's center rack (to the left of the rinse tanks) using two 2-1/16" W x
2.
3" L x 3/8" thread U-bolts (P/N 107-0171-609) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
Manual No. 016-0230-014
Fitting
PowerGlide
Part Number Port
LC, RC
333-0012-045
LV, RV
333-0012-093 P, T
333-0012-211 EF
13