Raven AutoBoom XRT Installation Manual page 20

C 3
HAPTER
2. Mount the REM node (P/N 063-0173-965) to the valve mounting bracket using two 1/4"-20 x 3" hex bolts, one
1/4"-20 x 2.5" hex bolt, three washers, and three 1/4" - 20 lock nuts.
NOTE: Position the node so that the cable connectors will face down.
The REM ECU is installed at the factory on model year 2020 and newer machines with a 132' and 135'
aluminum boom.
FIGURE 9. REM Node Installed
3. Secure the mounting bracket to the machine center rack using two 2-9/16" W x 3-1/2" L x 3/8" thread U-bolts
and four 3/8"-16 flange nuts.
16 AutoBoom® XRT Installation Manual for Case IH Patriot 3xx0/44x0 and Trident 5550 (MY 2017-2021)
Installed REM Node