Raven AutoBoom XRT Installation Manual page 22

C 3
HAPTER
4. Connect the straight end of the supplied hydraulic hose (P/N 214-1000-311) to the 90° end of the installed tee
fitting.
5. Connect the 90° end of the installed hydraulic hose to Port P on the AutoBoom valve.
FIGURE 11. Pressure and Tank Hoses Installed
6. Disconnect the machine tank hose from the machine hydraulic valve.
7. Install a -8 ORFS M/M/F swivel run tee fitting (P/N 333-0012-028) in the machine tank port.
8. Attach the machine tank hose to the opposite end of the installed tee fitting.
9. Connect the straight end of the supplied hydraulic hose (P/N 214-1000-311) to the 90° end of the installed tee
fitting.
10. Connect the 90° end of the installed hydraulic hose to Port T on the AutoBoom valve.
18 AutoBoom® XRT Installation Manual for Case IH Patriot 3xx0/44x0 and Trident 5550 (MY 2017-2021)
P
T