Optional Damper Installation - Raven AutoBoom XRT Installation Manual

C 3
HAPTER

OPTIONAL DAMPER INSTALLATION

For optimal performance, install variable dampers on the machine center rack:
1. Identify the damper installation location. This is on the right side of the center rack just below where the
existing cable is routed.
NOTE: Weld studs on the center rack may need to be removed for proper damper installation and operation.
FIGURE 15. Welding Stud Locations
FIGURE 16. Damper Installation Location
2. Remove the cable ties that secure any cables that may be in the way when mounting the damper brackets to
the boom center rack.
22 AutoBoom® XRT Installation Manual for Case IH Patriot 3xx0/44x0 and Trident 5550 (MY 2017-2021)
Welding
Studs
Damper
Installation
Location