Chapter 5 Wiring Installation; Autoboom® Abm Node Installation; Patriot - Raven AutoBoom XRT Installation Manual

CHAPTER
5
AUTOBOOM® ABM NODE INSTALLATION

PATRIOT

NOTE: The ABM ECU is already installed on machines with factory 132' and 135' aluminum booms. The ABM
ECU can be located in front of the rear axle on the left side of the machine.
1. Locate the machine battery box.
2. Using the two provided angle brackets (P/N 107-0235-013) and 3/8" x 6-1/2" or 3/8" x 7-1/2" bolts, secure the
AutoBoom node mounting bracket (P/N 107-0235-009) to the machines frame in front of the battery box.
FIGURE 1. Installed AutoBoom XRT Node
Battery Box
3. Using the provided 1/4"-20 lock nuts, secure the AutoBoom node to the mounting studs on the AutoBoom
mounting bracket.
NOTE: Position the node so the connections are facing down.
016-0236-001 Rev. E
W IRING INSTALLATION
C H A P T E R 5
U-Bolt
ABM ECU
Mounting Bracket
41