Mount the AutoBoom Valve
AutoBoom Valve Installed on Mounting Bracket
FIGURE 1.
Secure the AutoBoom valve (P/N 063-0131-125) to the valve mounting bracket (P/N 107-0172-231) using
1.
four 5/16" hex bolts (P/N 311-0052-104) and four 5/16" split lock washers (P/N 311-1000-019).
AutoBoom Valve Mounted on the Machine
FIGURE 2.
Align the valve mounting bracket with the holes in the angled cross rail on the machine's center rack,
2.
positioning it so that the bend in the bracket is located on the left.
Secure the mounting bracket to the cross rail using three 3/8"-16 x 1" hex bolts (P/N 311-0054-105) and
3.
three 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
Manual No. 016-0230-116 Rev. A
Hydraulic System Installation
13