Install the Fittings on the AutoBoom Valve
Before mounting the AutoBoom valve on the machine, install the proper fittings on the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following
figure and table to install the fittings in the appropriate ports of the AutoBoom valve.
Fittings Installed on the AutoBoom Valve
FIGURE 8.
Fitting - 9/16" JIC (M) to 9/16" SAE O-Ring (M) Straight Adapter
Fitting - 9/16" JIC M/F 90° Elbow
Fitting - 9/16" JIC (M) to 3/4" SAE O-Ring (M) Straight Adapter
Mount the AutoBoom Valve
AutoBoom Valve Mounted on the Valve Mounting Plate
FIGURE 9.
Manual No. 016-0230-090
Fitting
PowerGlide Plus
Part Number
Port
LC, RC
333-0012-045
LV, RV
333-0012-042
RV
333-0012-046
Left T, P, EF
15