Intended Use; Proper Environment - MICRO-EPSILON optoCONTROL 2600 Operating Instructions Manual

Measure
optoCONTROL 2600
1.4

Intended Use

- The optoCONTROL 2600 is designed for use in industrial and laboratory applications.
It is used for
ƒ measuring displacement, distance, edge and offset
ƒ edge crack testing
ƒ position acquisition of components or machine parts
- The system must only be operated within the limits specified in the technical
3.5.
- The system must be used in such a way that no persons are endangered or machines
and other material goods are damaged in the event of malfunction or total failure of
the system.
- Take additional precautions for safety and damage prevention in case of safety-related
applications.
1.5

Proper Environment

- Protection class:
ƒ Light source/receiver: IP64 (applies with connected cable)
ƒ Controller:
i
The protection class is restricted to water (no drilling emulsions, cleaning solvents
etc.)!
Avoid quick changes between hot and cold!
Use a protective housing if the effects of water are continuous.
- The level of protection does not apply to the optical paths during operation, because if
they become contaminated, the function is impaired or fails completely.
- Temperature range:
ƒ Operation: 0 ... +50 °C (+32 ... +122 °F) with free air-circulation
ƒ Storage: -20 ... +70 °C (-4 ... +158 °F)
- Humidity: Up to 5 - 95 % RH (non-condensing)
- Ambient pressure: Atmospheric pressure
- Vibration: According to IEC 60068-2-6 (light source only/ receiver)
- Shock: According to IEC 60068-2-27 (light source only/ receiver)
i
Only use screened leads or the original cable from the range of accessories for
connecting a power supply unit and for the outputs!
IP40
data, see
Page 6