6.6.3.16 Activating The Output In The Trigger Measurement Mode; 6.6.3.17 Activating The Light Reference Tuning - MICRO-EPSILON optoCONTROL 2600 Operating Instructions Manual

Measure
optoCONTROL 2600

6.6.3.16 Activating the Output in the Trigger Measurement Mode

TRIGGERMODE TRIGGER
Name
Description: Activates the output in the trigger measurement mode
Command:
Byte 1 Byte 2
„+" „+"
„0" „D"
0x2C 0x20
i
This command corresponds to the external trigger input in the trigger measurement
mode.
Response:
Byte 1 Byte 2
„0" „D"
0x2C 0xA0
0x00 0x00

6.6.3.17 Activating the Light Reference Tuning

SET LIGHT REFERENCE TUNING
Name
Description: Activates the output in the trigger measurement mode.
Command:
Byte 1 Byte 2
„+" „+"
„0" „D"
0x2D 0x20
i
This command corresponds to the menu „1B20 - Light reference tuning".
Response:
Byte 1 Byte 2
„0" „D"
0x2D 0xA0
0x00 0x00
Possible errors:
0x0000000D Unsuccessful Light reference tuning, optical path not free
Byte 3 Byte 4
„+" 0x0D 0x0D2B2B2B
„C" „1"
0x00 0x00
Byte 3 Byte 4
„C" „1"
0x03 0x00 0x0003A02C
0x00 0x00
Byte 3 Byte 4
„+" 0x0D 0x0D2B2B2B
„C" „1"
0x00 0x00
Byte 3 Byte 4
„C" „1"
0x03 0x00 0x0003A02D
0x00 0x00
hex
0x3143444F
0x0000202C
hex Remark
0x3143444F
Without error
0x00000000 Error code
hex
0x3143444F
0x0000202D
hex Remark
0x3143444F
Without error
0x00000000 Error code
Page 55