Technical Data - MICRO-EPSILON optoCONTROL 2600 Operating Instructions Manual

Measure
3.5

Technical Data

Model
Measuring range
Min. target size
Distance light source - receiver
(free space)
1
Measuring distance (target - receiver)
Measuring rate
Resolution
1
Linearity
2
Repeatability
2 3
Light source
Analog output
Digital interface
Switching output
Signal input
Digital output
Connection
Mounting
Temperature range
Supply voltage
Max. current consumption
Shock (DIN EN 60068-2-27)
Vibration (DIN EN 60068-2-6)
Protection class Receiver/Light source
(DIN-EN 60529)
Material Receiver/Light source
Weight
Measuring programs
Control and display elements
Features
The specified data apply for a consistent room temperature of 20 °C, after a warm-up time of 30 min.
1) Resolution of the digital display (resolution of digital output 0.6 µm)
2) Measured with 3 sigma; edge measurement without averaging, working distance 150±5 mm, option 209: 200 mm
± 5 mm
3) Measured with static noise over 3 min.
4) Only for synchronization of two or more optoCONTROL 2600 models
optoCONTROL 2600
ODC 2600-40
300 (±50) mm
150 (±5) mm
Zero setting/reset; trigger/light (on/off); synchronization
Receiver
Light source
Controller
Supply: 3-pole socket; signal: 25-pole SUB-D socket
Storage
Operation
Controller
Light source
Receiver
Controller
Mounting rail
LCD display (value, maximum, minimum, peak-to-peak)
40 mm
0.3 mm
2.3 kHz
0.1 µm
< ±3 µm
≤ ±1 µm
red LED 625 nm
0 to 10 VDC, ±10 VDC, selectable
RS232 (115.2 kBaud); RS422 (691.2 kBaud)
Error, 4 x limit values; max. 30 V DC ≤ 100 mA
Synchronization
integrated cable, length 2 m 12-pole
integrated cable, length 2 m, 5-pole
Receiver: 12-pole M8 socket;
Light source: 5-pole socket for light source
Mounting rail (see accessories), mounting holes
-20 °C ... +70 °C (non-condensing)
0 °C ... +50 °C (non-condensing)
+24 VDC (±15 %)
< 1 A
15 g / 6 ms
2 g / 20 ... 500 Hz
IP64
IP40
Aluminum housing
450 g
800 g
1200 g
900 g
Edge light-dark; Edge dark-light;
(Outside) diameter/width
Gap/(inside diameter)
Any segment edge
Measurement chart in mm / inch, selectable;
Menu language in German / English, selectable
3x LED (power on, light on, error)
4 editable user programs
ODC 2600-40(209)
400 (±50) mm
200 (±5) mm
≤ ±1.5 µm
4
1100 g
Page 11