Appendix | Optional Accessories
optoCONTROL 2600
Appendix
A 1
Optional Accessories
The following accessory parts are optionally available for the optoCONTROL 2600 from
MICRO-EPSILON Eltrotec GmbH:
Name
PS2020 Power supply 24 V
PS2031 Power supply 24 V /
2.5 A
PC2500-3
PC2500-10
SCA2500-3
SCA2500-10
SCD2500-3/3/RS232 Signal out-
put cable with RS232, 3 m long
SCD2500-3/10/RS422 Output
cable with RS422 interface
IF2008/PCIE
IF2008E expansion board
RS422/analog/PCI
SCD2500-3/RS422 Output cable
3 m with open ends
CE1800-3 Sensor cable exten-
sion, 3 m long
Description
Input 100 - 240 VAC; output 24
VDC / 3.3 A, installation type;
mounting onto symmetrical stan-
dard rail; 35 mm x 7.5 mm, DIN
50022
Power supply unit universal 100-
240 V/24V/ 1A; 2m-PVC; terminal-
2P-BU-ge; with additional UK and
USA plug
Power supply cable, 3 m long,
open
Power supply cable, 10 m long,
open
Signal output cable analog, 3 m
Signal output cable analog, 10 m
Digital and analog output cable
with additional wiring for the RS232
interface
3 m long component cable with
open ends for the analog output
and the switching outputs,
10 m long component cable with
15-pole connector for use with the
serial RS422 interface, possible
use with IF2004 interface card
RS422 interface / up to 4 MBaud;
for PC with PCIe interface, PCIe
x1 interface Rev1.0 FIFO for 4096
data bytes (depending on the
sensor log), incl. interface driver for
Windows 10 for 1 to 4 laser-optical
ODC2600 sensors
2 digital RS422 signals, 2 analog
signals and 8 I/O signals; 6 digital
signals in total when used with
IF2008/PCIE, 2 encoders, 2 analog
signals and 8 I/O signals; FIFO
data memory, synchronous data
acquisition
3 m long cable with open ends for
use with the serial RS422 interface,
possible use with the IF2001/USB
converter from RS422 to USB or
converter for RS422/USB ILD sen-
sors, industrial-grade; for ODC2600
sensors
Sensor cable extension for camera,
3 m long for the 2600 sensors
Item number
2420062
2420096
2901123
2901124
2901120
2901215
2901121
2901122
2213032
2213018
29011111
2901057
Page 62
Need help?
Do you have a question about the optoCONTROL 2600 and is the answer not in the manual?
Questions and answers