Pressure Regulator Unit; Transport By Crane; Placing Into Operation - WAGNER EP 3000 Operating Manual

5. Pressure regulator unit

0
1
25
22 Switch box with electronic pressure regulator unit
23 Pressure regulator
EP 3000 230 V
24 Motor safety switch
EP 3000 400 V
25 Motor safety switch
The required operating pressure is adjusted (infinitely
variable) using the pressure regulator.
Turn right as far as possible – maximum operating
pressure.
Turn left as far as possible – minimum operating
pressure.

Transport by crane

Straps or cables (not wire cables) should be used when
transporting the unit using a crane.
24 23
22
E P
3 0
0 0
GB

Placing into operation

1. Before connecting to the electricity supply ensure
that the supply voltage corresponds with the details
on the rating plate.
The connection should be made using a shockproof
socket earthed according to regulations.
2. Screw the special high-pressure hose (fig. 12, item
1) onto the high-pressure filter with open-ended
spanner.
Screw connection socket into the high-pressure
hose.
Screw the spray gun with the selected tip onto the
high-pressure hose.
When tightening and loosening the high-
pressure hose (fig. 12, item 1), hold screwed
socket of the high-pressure filter with open-
ended spanner.
29
E P
3 0
1
0 0