Operation Panel Display And Key Operation - V&T E5-H Series User Manual

4.7 Operation Panel Display and Key Operation

4.7.1 Classification of Display Status
There are 8 types of display status of operation panel:
SN
Display status of stopping
1
parameters
Display status of running
2
parameters
Display status of fault and
3
Display status of first level
4
Display status of second
5
level menu
6 Password verification status
Password modification
7
8 Information prompt status
4.7.2 Display Status and Operation Process
>> key
In the display status of first level menu, press >> key to select the edit bit of function code PX.YZ.
In second level menu or password verification status, press >> key to select the data edit bit.
Auto switch between status
If no key is pressed for 30s, the screen automatically returns to the display status of stopping
parameters, or the display status of running parameters.
If no key is pressed for 1 minute, clear menu edit status of PX.YZ to return to P0.00.
If there is password setting or key locking setting and if no key is pressed for 5 minutes, the panel will
enter password protection or locking status automatically.
Display Status and Operation Procedure
34
E5−H High Performance Universal Inverter
Status
Press >> key to switch the displayed parameters, P2.03 can be used
to set the displayed parameters.
Press >> key to switch the displayed parameters, P2.02 can be used
to set the displayed parameters.
In other 7 kinds of display status, if there is any fault happens,
alarm directly enter this status.
When the keys are not locked, in status of SN1, SN2, SN3 and SN7,
menu press PRG to enter.
In the display status of first level menu, press PRG to enter.
If password protection is enabled, press PRG to enter in the display
status of first level menu.
In the display status of stopping and running parameters, press ∧
status and ∨ to enter.
See 4.4.5 for identifying the LED display characters.
Chapter 4 Using Instructions of Operation Panel
User Manual
Meaning