V&T E5-H Series User Manual page 129

7. Case Study of Modbus Communication Control
Start No.1 inverter to perform forward running, and set the rotation velocity to 50.00Hz (indicating 5,000 internally) as
per the following commands:
Address
Request 0x01
Response 0x01
Read the operating frequency of No.1 inverter and the response operating frequency of the inverter is 50.00Hz:
Address
Request 0x01
Response 0x01
No.1 inverter stops in the default mode:
Address
Request 0x01
Response 0x01
Note:
It needs to set P0.06 to 2 firstly.
8. Communication Network Construction
Connecting one inverter to the computer
122
E5−H High Performance Universal Inverter
Function Register
code Address
0x10 0x8000
0x10 0x8000
Function Register
code Address
0x03 0x8136
0x03 None
Function Register
code Address
0x06 0x8000
0x06 0x8000
Attached Figure 3 Connecting One Inverter to the Computer
Appendix A Modbus Communication Protocol
User Manual
Number Bytes
0x0002 0x04
0x0004 None
Number
0x0001
0x02
Register Contents
0x0000
0x0000
Register
Check Sum
Contents
0x0001,0x1388 0xCEFF
None 0xE80A
Register
Bytes
Contents
None 0x4C38
0x1388 0xB512
Check Sum
0xA00A
0xA00A