Table of Contents
Advertisement
E5−H High Performance Universal Inverter
User Manual
Figure 2−3 Removal of operation panel
Figure 2−4 Mounting of operation panel
2.3.2 Removal and Mounting of Covers of Inverter with Plastic Enclosure
Removal of operation panel
Please refer to 2.3.1 removal and mounting of operation panel.
Removal of lower cover
After removing the mounting screws of the cover, press the left and right sides of the cover
forcefully in direction 1 and at the same time lift the cover in direction 2, as shown in Figure 2−5.
Removal of upper cover
As shown in Figure 2−6, press the left and right sides of the cover forcefully in direction 1, and at
the same time lift the cover in direction 2.
Figure 2−5 Removal of lower cover
Figure 2−6 Removal of upper cover
Mounting of upper cover
After connecting the cables of main circuit terminals and control circuit terminals, insert the upper
claw grab of the upper cover into the groove of the inverter body, as shown in position 1 in Figure
Chapter 2 Inverter Installation
11
Advertisement
Table of Contents
