V&T E5-H Series User Manual page 43

4.8.2 Setting Frequency
For example, set P0.05=25.00Hz.
PRG
50.00
P0.0 0
4.8.3 Setting Password
For example, setting user password P0.00 to 0003.
4.8.4 Password Verification
Assume that the function codes after P0.00 are protected by password and the password is 3. If the
password protection is not enabled, you can press ESC+PRG+∧ to enable the password in last example
of P0.00. You can verify the password according to the following process:
Note: If you use RS 485 communication mode to perform password verification, please refer to Appendix A.
Description of register 0xF000 in Modbus communication protocol.
4.8.5 Clearing Password
For example, clear the user password P0.00.
36
E5−H High Performance Universal Inverter
PRG
P0.0 5
5 Times
Chapter 4 Using Instructions of Operation Panel
User Manual
>>
50.0 0 5 0.00
1 Time
25.00
>>
∨
3 0.00
2 Times
1 Time
PRG
ESC
P0.0 6
30.00
∨
5 Times
25.00