Table of Contents
Advertisement
3.1 Introduction to Operation Panel
status indicator
Escape Key：Exit the
menu and discard the
stored data
Multi-function button
Run Key：Used as a boot
under the control panel
Multi−function M key indicator
On: Run command reference is operation panel
Off: Run command reference is terminals
Flash: Run command reference is communication
MON：Run command reference channel indicator
On: Run command reference is operation panel
Off: Run command reference is terminals
Flash: Run command reference is communication
RUN：Running status indicator
On: Inverter is running
Off: Inverter has stopped
Flash: Inverter is stopping
FWD：Run forward indicator
On: In stop status, inverter had run forward
command
In running status, inverter is running forward
Flash: Changing from forward running to reverse
running
REV：Run reverse indicator
On: In stop status, inverter had run reverse
command
In running status, inverter is running reverse
Flash: Changing from reverse running to forward
running
12
high performance crane special inverter User Manual
Chapter 3 Operation Panel Instructions
Chapter 3 Operation Panel Instructions
Data or function code display
Stop/Reset Key：Used as a stop or
reset under the control panel control
Forward/Reverse Key：Used as the forward and
reverse direction switch under the control panel control
Hz：Frequency indicator
On: Current displayed value unit is
running frequency
Flash: Current displayed value unit is
setting frequency
A: Current indicator
V：Voltage indicator
Hz+A：Rotating speed indicator
On: Current displayed value unit is
rotating speed
Flash: Current displayed value unit is
setting rotating speed
Hz+V：% indicator
A+V：Self definable indicator
Hz+A+V：Time indicator
The indicators are off : Current
displayed parameter is no unit
Unit indicator
Programming key：Enter
each level of menu，Confirm
displayed data storage
Increase
Key：Increase in data
Shift Key：Move the data
location you want to change
Decrease Key：Data reduction
Advertisement
Table of Contents
