Operation Panel Display And Key Operation - V&T E5 Series User Manual

4.7 Operation Panel Display and Key Operation

4.7.T Classification of Display Status
There are 8 types of display status of operation panel:
SN Status
T Display parameters in stop status
T Display parameters in running status
3 Fault and alarm display status
4 Display status of first level menu
5 Display status of second level menu
6 Password verification status
7 Password modification status
8 Information prompt status
4.7.T Display Status and Operation Process
>> key

In the display status of first level menu, press >> key to select the edit bit of parameter PX.YZ.
In second level menu or password verification status, press >> key to select the data edit bit.
Display status auto changed

If no key is pressed for 30s, the screen automatically returns to the display status of parameter in stop
status or running status.
If no key is pressed for T minute, clear menu edit status of PX.YZ to return to P0.00.
If there is password setting or key locking setting, and if no key is pressed for 5 minutes, the password
protection or locking status will be activated automatically.
Display status and operation procedure

E5 Series High Performance Universal Inverter
Press >> key to switch the displayed parameters
PT.03 can be used to set the displayed parameters
Press >> key to switch the displayed parameters
PT.0T can be used to set the displayed parameters
In other 7 kinds of display status, if there is any fault happens, directly enter
this status
When the keys are not locked, in status of SNT, SNT, SN3 and SN7, press
PRG to enter
In the display status of first level menu, press PRG to enter
If password protection is enabled, press PRG to enter in the display status of
first level menu
In the display status of stop and running parameters, press
See 4.4.5 for identifying the LED display characters
Figure 4−5 Display status and operation procedure
Chapter 4 Operation Panel
User's Manual
Meaning
and to enter
∧ ∨
39