V&T E5-H Series User Manual page 29

Note:
1. The arrangement sequence of the control circuit terminals is as follows:
2. Wiring mode of the multi−functional input/output terminals
When using the internal +24V power supply of the inverter, the external controller adopts NPN sink
current wiring mode.
When using the internal +24V power supply of the inverter, the external controller adopts PNP
draw−off current wiring mode.
Note: The short circuit bar between terminal +24V and terminal PLC must be removed and short
circuit bar shall be connected between PLC and COM terminals.
22
E5−H High Performance Universal Inverter
Chapter 3 Wiring of Inverter
User Manual