Software Problems - Inspur NF5280M6 User Manual

-2, click on WinOF-2 and choose the corresponding OS version), and then install
the Chipset driver.
Figure 7-1 Downloading the Driver from Mellanox Official Site
2)
If the instructions above do not resolve the problem, please contact Inspur
Customer Service.

7.2 Software Problems

•
OS Installation Problems
Symptoms:
Unable to load the RAID driver or create partitions larger than 2 T during OS installation;
C disk usage is too high after OS installation, etc.
Solutions:
1)
If it fails to load the driver during OS installation, check the RAID driver version. Go to
Inspur website https://en.inspur.com
drivers need to be loaded several times.
2)
If it fails to create partitions larger than 2 T during OS installation, select
Advanced>CSM Configuration>Boot option filter>UEFI only (For detailed reference
document, please see
interface. Choose UEFI to boot the OS. The server will restart automatically. It needs to
enter the CMD command line to change the drive format to GPT, and then partitions
larger than 2 T can be created;
3)
If the C disk usage is too high after installing the Windows OS, turn down the virtual
to download the correct RAID driver. Some RAID
Firmware Update and Configuration) in BIOS, save and exit BIOS
63