Bmc Settings; Introduction; Server System Overview - Inspur NF8260M5 User Manual

8 BMC Settings

8.1 Introduction

This Specification describes the functional specifications for the Baseboard Management
Controller (BMC). It also describes the feature's detail information.
This document is written for software developers, system integrators, testers, server
management users.

8.2 Server System Overview

BMC is an independent system of host server system. This independent system has its
own processor and memory; the host system can be managed by BMC system even if host
hardware or OS hang or went down.
8.2.1 Main Feature
Support IPMI 2.0, IPMI Interface includes KCS, Lan, IPMB

Management Protocol, IPMI2.0, HTTPS, SNMP, Smash CLI

Web GUI

Redfish

Management Network Interface, Dedicated/NCSI

Console Redirection (KVM) and Virtual Media

Serial Over Lan (SOL)

Diagnostic Logs, System Event Log (SEL), Blackbox Log, Audit Log

Hardware watchdog timer; Fans will full speed when BMC no response in 4 mins

Intel® Intelligent Power Node Manager 4.0 support

Event Alert, SNMP Trap (v1/v2c/v3), Email Alert and Syslog

Dual BMC firmware image support

Storage, Monitor RAID Controller/HDD/Virtual HDD

Firmware update, BMC/BIOS/CPLD

Device State Monitor and Diagnostic

RAID Monitor/Configure

BMC Settings
107