Table of Contents
Advertisement
3. Big Child (20~30 kg)
With the increase of the ages, when the child
breaks the weight or height limit required by
the child safety seat but is still unable to use
the seat belt properly, the child safety cushion
shall be used for proper usage of the seat belt.
securing of the big child seat
4. Install the Child Safety Seat and Seat
Belt Properly
The safety seat should be installed with the
seat belt in accordance with the instructions
of the manufacturer and the angle of the seat
should also be noticed.
Make sure the seat belt cross the safety seat in
right way. Purchase the safety seat and install
it in strict accordance with the instructions in
the manual. When attaching the child seat to
the vehicle seat, apply some force to press the
child seat onto the vehicle seat and then secure
it tightly. The seat belt should not be loose.
Make sure the belt restricting the child is
adjusted to its most suitable length. The belt
should be tight enough to allow only two fin-
gers inserted between the child's chest and the
belt. Do not place the strained buckle onto the
belly of the child. The leg part of the seat belt
should pass from near the pelvis instead of
belly, from one side hipbone to another.
The skew part of the seat belt should be se-
cured on the shoulder of the child instead of
the neck. Never squeeze the seat belt under the
hip or behind the back of the child.
Warning
Many kids may slip out of or re-
lease the seat belt buckle themselves
during the drive. Do not attempt to
prevent this condition by changing the
buckle design. This may affect the fast
release of the seat belt and have you
delayed to release the seat belt and pull
out the child in case of accidents.
Randomly check the child seat
for firmness to prevent the child from
releasing the seat belt in his/her discre-
tion.
40
Part I
Advertisement
Table of Contents
