Vehicle Drag - Geely MK Series Owner's Manual

131
Part III
Press one side of wheel trim by hand, and then
tap along the edge of the wheel trim with the
wrist. Make sure the wheel trim fixes well.
Warning
 When car is being lowered, make
sure all parts of your body and other
people will not be hurt if the car is
lowered to the ground.
Use 103N torque wrench to tighten

the wheel nuts. Or, nuts may loose and
wheel may fall off, which leads to se-
vere accidents.
Notice
Make sure if parking brake is reli-

able before the jacking the vehicle up.
Make sure the jack is reliable before

jacking the vehicle up.
Forbid people from going under the

vehicle when vehicle is being lifted up.
Use the middle of jack holder to bear

vehicle load.
 Avoid replacing wheels on slopes and
soft grounds. Do not disturb traffic, use
warning plate as required by law.
Pay attention to the vehicle when

driving after the wheel is replaced. Should
there be any abnormal situation, stop the
car, inspect and resolve the problem.

5. Vehicle Drag

If the vehicle is stuck in snow, mud, sand, or
similar places, try shaking the car back and
force to move it out.
Warning
If there is any people or objects around
the vehicle, do not shake the car back
and force. Because when pushing it, the
vehicle may get out of stuck and move
back and force suddenly, and hurt peo-
ple or damage objects.