Geely MK Series Owner's Manual page 15

Table of Contents

Advertisement

Engine Coolant Temperature Indi-
cation and Warning Light (Digital
Combination Meter)
T h e e n g i n e c o o l a n t
temperature indicator
becomes red and flashes
at high temperature and
becomes blue at low
temperature
When the ignition switch is turned on, the indi-
cator and warning light indicates the temperature
of the engine coolant. The working temperature
of the engine will vary with the change of the
weather and engine load.
If the temperature of the engine coolant is low
when the ignition switch is turned on, the engine
coolant temperature indicator (blue) goes on. If
the indicator remains on after the engine is fully
heated, you have to immediately contact Geely
service station for inspection of the vehicle.
When the engine coolant high temperature
warning light (red) goes on, it indicates that the
engine is too hot. If the vehicle is too hot, you
have to stop it to cool the engine.
The engine may be overheated in the following
conditions:
Long Climb in hot weather
Deceleration or parking after high-speed
driving
Race the engine for a long time while
turning on the air conditioner under the
condition of intermittent driving
Notice
 Do not remove the thermostat in the en-
gine cooling system, otherwise the engine
may be overheated. The thermostat is used
to control the cooling flow to confine the
temperature of the engine to the specified
range.
 In case of overheated engine, don't
continue the driving.
Engine Coolant Temperature Indi-
cation and Warning Light (Needle
Combination Meter)
engine coolant
t e m p e r a t u r e
gauge
engine coolant
high tempera-
ture indicator
When the ignition switch is turned on, the engine
coolant temperature gauge indicates the tempera-
ture of the engine coolant. The working tempera-
ture of the engine will vary with the change of
the weather and the engine load.
If the engine coolant temperature is low when
the ignition switch is turned on, the coolant tem-
perature gauge pointer will stop at "C". If the
pointer remains at "C" after the engine is fully
heated, you have to contact the Geely service
station immediately for inspection of the vehicle.
8
Part I

Advertisement

Table of Contents
loading

Table of Contents