Thermo Fisher Scientific
d. Scroll to bottom of screen and Enable Dual Flow
e. While in setup for Flow 2 calibration, verify calibration setup and
make changes as necessary. Flow 2 is the 5 LPM flow channel;
operational setpoint is 1.67 LPM
f. Use the menu key to escape back to the flow calibration menu and
use the flow to verify the 20 LPM flow channel calibration settings.
Operational for Flow is 15.00 LPM
Partisol 2000i and Partisol 2000i-D Instruction Manual
Calibration
Flow Calibration
8-9