Table of Contents
Advertisement
Communications Using iPort or RPComm
Using RPComm
D-38
Partisol 2000i and Partisol 2000i-D Instruction Manual
14. Place your cursor in the small white box located to the left of "Connect
using Modem" and click once with your mouse. A checkmark should
appear in the box.
15. To set up the unit for a modem connection, the Connection
Description box (in the top left corner) should be set to your modem's
description. In
Figure
56K Voice INT PnP." The description will vary depending on factors
such as your modem type, whether it is an internal or external modem
and which COM port the modem is connected to.
16. The Station Setup portion of the screen should have been set when you
established your direct connection. Do not modify these settings.
17. Select the "Modem Setup >>" button to display the Modem Properties
screen
(Figure
D–23).
18. Generally, the values that your system chooses for variables on this
screen are appropriate for a proper connection. However, if your unit
and modem experience communication difficulties, these setting may
need to be altered. Contact your modem's manufacturer for more
information, if necessary.
19. Select "OK" to exit the Modem Properties screen. The AK Protocol
Setup screen
(Figure
your computer.
20. In the AK Protocol Setup screen, enter the phone number to be called
in the "Phone Number" box at the bottom of the screen. Do not enter
anything in the "Dialing String" box. This setting will be automatically
configured by the system.
21. Select the "Dialing Setup >>" button to display the Dialing Properties
screen
(Figure
D–24).
22. Fill in the required information on the Dialing Properties screen. Verify
that the "Number to be dialed" shown at the bottom of the screen
matches the phone number as it should be dialed. If the phone number
is not correct, there is an error on this screen or you may have
incorrectly entered the phone number on the AK Protocol Setup
screen.
D–22, the modem description is "U.S. Robotics
D–22) will now appear as the active screen on
Thermo Fisher Scientific
Advertisement
Table of Contents
Troubleshooting
