Thermo Scientific Partisol 2000i Instruction Manual page 98

Sampler Operation
Programming a Sample Run
7-12 Partisol 2000i and Partisol 2000i-D Instruction Manual
Mode screen, press
confirm the change and turn off Audit mode.
2. On the Main screen, confirm that the date and time are correct.
If the date or time is not correct, in the Main Menu, scroll to
Instrument Setup and press
scroll to Date/Time and press
screen. In the Date and Time screen, press
mode and follow the screen directions to edit the date and/or time.
When the changes are complete, press
to return to the Instrument Setup menu.
3. Confirm that the Site ID is correct. In the Main Menu, scroll to
Instrument Setup and press
menu. In the Instrument Setup menu, scroll to Site ID, press
and confirm that the Site ID is correct.
If the Site ID is not correct, scroll to the incorrect Site ID, press
to display the alphanumeric entry screen, enter the correct Site ID
description, and save it.
For information on the Site ID, refer to
For information on how to use the alphanumeric entry screen, refer to
"Alphanumeric Entry
4. Press repeatedly to return to the Main Menu. In the Main Menu
with the cursor at Sample Setup, press
Setup menu. The Sample Setup menu allows you to choose modes such
as:
Apply EPA Times which is a shortcut key for midnight-to-
●
midnight, 24-hour sampling
Apply Default Times which automatically applies the default time
●
settings that are programmed in the default Sample Setup menu
located in the Instrument Setup Screen
To apply EPA default conditions (midnight-to-midnight, 24-hour
sampling) scroll to Apply EPA Times in the Sample Setup menu, press
to display the Apply EPA Times screen, and press
the EPA times.
To Apply Default Times, scroll to Apply Default Times in the Sample
Setup menu, press
and press to set the default times.
to exit Audit mode and press
to display Instrument Setup menu,
to display the Date and Time
to display the Instrument Setup
"Site
Screen" on page 9-4.
to display the Apply Default Times screen,
to
to access the Edit
to save the changes. Press
ID" on page 9-35.
to display the Sample
to set
Thermo Fisher Scientific
,