Thermo Scientific Partisol 2000i Instruction Manual page 9

Electrical and
Safety Conformity
C
U.S. EPA Quality
Assurance
Specifications
Thermo Fisher Scientific
This product has been tested by ETL Testing Laboratories, and has been
documented to be in compliance with the following U.S., Canadian, and
EU standards:
UL Standard 61010-1
CAN/CSA C22.2 NO. 61010-1
EN61010-1
US
Thermo Fisher Scientific certifies that this product operates in compliance
with the EC Directive 89/336/EEC with reference to electrical emissions
and immunity. Specifically, the equipment meets the requirements of
EN55011 Group 1, Class B (Emissions) and EN55082-1 (Immunity).
The hardware has been tested for personal or fire safety hazards, and meets
the requirements of UL/CSA/EN61010-1/UL61010-1 (Safety) in
fulfillment of EU Directive IEC 61326-1.
IEC 60529
Issued:2001/01/01 Ed:2.1 Degrees of Protection Provided by Enclosures
(IP Code); COR. No.1:2003; COR. No.2:2007; COR. No.3:2009
This operating manual includes references to the U.S. Environmental
Protection Agency (EPA) 2.12 Quality Assurance Handbook, Volume II,
Part II. Partisol Samplers that are installed as part of a U.S. EPA
monitoring network, or which must meet U.S. EPA monitoring
requirements, should refer to the procedures found in the U.S. EPA 2.12
Quality Assurance Handbook. The 2.12 Quality Assurance Handbook
provides general EPA-recommended guidance and, in some cases, may
provide additional, more detailed or more recent guidance.
A copy of the U.S. EPA 2.12 Quality Assurance Handbook can be obtained
from the AMTIC web site: http://www.epa.gov/ttn/amtic/pmqa.html, the
QC coordinator at any EPA Regional Office, or from the Monitoring and
Quality Assurance Group (MD- 14), U.S. EPA, Research Triangle Park,
NC 27711.
Electrical and Safety Conformity
Partisol 2000i and Partisol 2000i-D Instruction Manual
About This Manual
v