Thermo Scientific Partisol 2000i Instruction Manual page 203

Digital Input Settings
Thermo Fisher Scientific
Non-Alarm
The Non-Alarm status screen allows the user to select the non-alarm status
for the selected relay output. The selected item is shown by "<--" after i
In the Main Menu, choose Service > External I/O > Output Relay
●
Settings > Select relay 1-10 > Instrument State > Non-Alarm.
The Digital Input Settings menu displays a list of the 16 digital inputs
available, and allows the user to select the instrument parameter or logic
state to change for the relay selected. The actual use of these inputs will
vary based on the application.
Note The digital inputs must be asserted for at least one second for the
action to be activated.
Note Not all of the I/O available in the instrument are brought out on the
supplied terminal board, if more I/O is desired, an alternative means of
connection is required.
In the Main Menu, choose Service > External I/O > Digital Input
●
Settings.
ALARM STATUS ITEMS:
>NONE
GEN ALARM
MB STATUS
MIB STATUS
I/O BOARD STATUS
CTRST SSET INSTS
NON ALARM STATUS ITEMS:
>NONE
LOCAL/REMOTE
SERVICE
CTRST SSET INSTS
▲
▲
Firmware Screen Descriptions
<--
STAT
STAT
Partisol 2000i and Partisol 2000i-D Instruction Manual
Service Menu
9-79