Thermo Scientific Partisol 2000i Instruction Manual page 7

Safety and
Equipment
Damage Alerts
Thermo Fisher Scientific
This manual contains important information to alert you to potential safety
hazards and risks of equipment damage. Refer to the following types of
alerts you may see in this manual.
Safety and Equipment Damage Alert Descriptions
Alert
DANGER
WARNING
CAUTION
Equipment Damage
Safety and Equipment Damage Alerts in this Manual
Alert
WARNING
CAUTION
Equipment Damage
Safety and Equipment Damage Alerts
Description
A hazard is present that could result in death or serious
personal injury if the warning is ignored.
A hazard or unsafe practice could result in serious
personal injury if the warning is ignored.
A hazard or unsafe practice could result in minor to
moderate personal injury if the warning is ignored.
A hazard or unsafe practice could result in property
damage if the warning is ignored.
Description
If the Sampler is mounted on a stand, it could fall or tip
over in high wind conditions if the stand is not properly
▲
anchored.
The service procedures in this manual are restricted to
qualified service personnel only.
If the equipment is operated in a manner not specified by
the manufacturer, the protection provided by the
equipment may be impaired.
If the LCD panel breaks, do not let the liquid crystal
contact your skin or clothes. If the liquid crystal contacts
your skin or clothes, wash immediately using soap and
▲
water.
Do not attempt to lift the instrument by the cover or other
external fittings.
The stand must be anchored when installed outdoors to
prevent tipping of the Sampler and/or stand in high
winds.
Some internal components can be damaged by small
amounts of static electricity. A properly grounded
antistatic wrist strap must be worn while handling any
internal component. If an antistatic wrist strap is not
available, be sure to touch the instrument chassis before
Partisol 2000i and Partisol 2000i-D Instruction Manual
About This Manual
▲
▲
▲
▲
▲
▲
iii