Thermo Scientific Partisol 2000i Instruction Manual page 199

Analog Inputs
Thermo Fisher Scientific
OTHER MEASUREMENTS 2:
>NONE
AMBIENT TEMP
FILTER TEMP
COMPRT TEMP
ELECT TEMP
CTRST SSET
ELECT TEMP
TEMP DLT
TEMP DLT MAX
RELATIVE HUM
WIND SPEED
WIND DIR
WIND SPD AVG
WIND VEL
WIND VEL AVG
WIND DIR AVG
Table 9–7. Data in Run Screen – Other Measurements 2
Data Description
None Leaves that record field blank
The ambient temperature in C
Ambient Temp
The temperature at filter 1 in C
Filter Temp
The temperature of the filter compartment in C
Comprt Temp
The temperature of the electronics enclosure in C
Elect Temp
Temp Dlt The temperature of filter 1 minus the ambient
temperature in C
Temp Dlt Max The maximum temperature difference of filter 1 over the
sample period in C
Relative Hum The relative humidity in percent
Wind Speed The wind speed in km/hr
Wind Dir The wind direction in degrees (0-360)
Wind Spd Avg The wind speed average in km/hr
Wind Vel The wind velocity in km/hr
Wind Vel Avg The wind velocity average in km/hr
Wind Dir Avg The wind direction average in km/hr
The Analog Inputs screen lists analog inputs
to select an analog input signal (none or analog inputs 1-8) that will be
included in the Run screen. If the I/O expansion board is not present,
<--

INSTS STAT
(Table
Partisol 2000i and Partisol 2000i-D Instruction Manual
Firmware Screen Descriptions
Service Menu
9–8). It allows the user
9-75