Thermo Scientific Partisol 2000i Instruction Manual page 54

Installation
Adjusting the Screen Contrast
2-12 Partisol 2000i and Partisol 2000i-D Instruction Manual
If the display contrast is not optimal, but the content on the screen is
visible, in the Main Menu, choose Service > Screen Contrast, or press the
CTRST soft key on the front panel, and adjust the screen contrast by
pressing or
to save the setting.
If the content on the screen is not visible, press the leftmost front panel soft
key once (the CTRST soft key), press
adjust the screen contrast, and press
use the "set contrast 10" C-Link command to set the screen contrast to mid
range, and then optimize the contrast. Refer to the
Configuration" on page
Appendix for more information on this command.
In the Main Menu, choose Service > Screen Contrast.
●
SCREEN CONTRAST:
CURRENTLY:
SET TO:
CTRST SSET
as appropriate to change the contrast. Press
or
to save the setting. You can also
B-20 in the "C-Link Protocol
50 %
60 % ?
 CHANGE VALUE
SAVE VALUE
INSTS STAT
as appropriate to
"Hardware
Commands"
Thermo Fisher Scientific