Q - Set Label Width - Intermec EasyCoder PC4 Programmer's Reference Manual

q - Set Label Width

Purpose:
Syntax:
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
Example 2:
On the tag below, the black marks are printed between the
perforations. The printer has a 203.2 dpi (8 dots/mm) printhead.
p = 31 mm (248 dots)
1
p = 7.0 mm (56 dots)
2
p = 17 mm (136 dots)
3
p
1
The Q command would be:
Q248,B56-136
This command is used to set the label width when using less than
full width labels.
qp
1
.
q Command Parameter Descriptions
Parameter Description
p Width of label measured in dots.
1
Default:
832 at 203.dpi (8 dots/mm)
1208 at 300 dpi (11.81 dots/mm)
Chapter 7 — Commands
Perforation
p
2
p
3
103