Define A Counter; Draw A Box And Two Lines; Place A Text Line With Fixed Data - Intermec EasyCoder PC4 Programmer's Reference Manual

Chapter 5 — Editing in Direct Mode

Define a Counter

Command
C0,6,L,+1,"Enter Serial Number:"

Draw a Box and Two Lines

Command
X0,0,4,752,584
LO0,144,752,4
LO440,232,4,160

Place a Text Line With Fixed Data

Command
A40,400,1,1,1,1,N,"Made in Sweden"
26
The counter has a maximum 6 digits.
Note: The variables V00, V01, V02, and the counter C0 are
defined within the label form named TEST. The next label form
containing variables and counters starts over again with V00 and
C0. If variable data is being sent from an external database, omit
the text between the quotes and replace with a space character, for
example V00,15,N," ".
Start to draw the surrounding box using the X command and
then draw the two lines using the LO command.
Enter a 90° rotated text line containing the fixed data "Made in
Sweden" in text size 1. The quotation marks enclosing the fixed
data are not printed. The text size (1) is the smallest resident font
in the printer.
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
Explanation
Define counter.
Explanation
Draw a box.
Draw a line.
Draw a line.
Explanation
90° text line containing fixed data.