Ek - Delete Soft Font; Es - Store Soft Font - Intermec EasyCoder PC4 Programmer's Reference Manual

Chapter 7 — Commands

EK - Delete Soft Font

Purpose:
Syntax:
Remarks:

ES - Store Soft Font

Purpose:
Syntax:
66
Example:
To print a soft font list, enter the command below:
EI
This command is used to delete soft fonts from memory.
EK["name"|"*"]
Soft fonts are stored using the ES command and listed using the
EI command.
Soft fonts can also be deleted from the printer using a program
such as Intermec LabelShop or Intermec InterDriver.
Example:
EK"a"
EK"*"
This command is used to download and store soft fonts in
memory.
ES"name"p p ,p a
1 2 3 1
.
ES Command Parameter Descriptions
Parameter Description
name Name of the soft font (one lowercase letter only in
1-n
the range a-z). Lower case named fonts minimize
soft font memory usage to only store fonts
downloaded and have 256 character limit.
p Number of characters to be downloaded using
1
hexadecimal coding. Range 00-FF hex (1-256
characters per soft font set).
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
b c "data a b c "data
1 1 1... n n n
"
n