Un - Disable Error Reporting; Up - Code Page And Memory Inquiry Print - Intermec EasyCoder PC4 Programmer's Reference Manual

UN - Disable Error Reporting

Purpose:
Syntax:
Remarks:

UP - Code Page and Memory Inquiry Print

Purpose:
Syntax:
Remarks:
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
This command is used to disable error reporting.
UN
Cancels US command.
This command causes the printer to print and send the currently
selected code page, and memory status to the host through the
RS-232 or USB port.
UP
The printer:
• sends information on the currently selected code page and
memory status back to the host (same as UM command).
• prints the current printer configuration.
The format of the data sent to the host in the following formats:
UMp ,p ,p ,p ,p ,p
1 2 3 4 5 6
.
UP Command Parameter Descriptions
Parameter Description
p Image buffer size in kilobytes.
1
p Form memory allocation size in kilobytes.
2
p Form memory free in kilobytes.
3
p Graphic memory allocation size in kilobytes.
4
p Graphic memory free in kilobytes
5
p External font memory allocation size in kilobytes.
6
p External font memory free in kilobytes.
7
p Number of data bits.
8
p Code page.
9
p Country code.
10
Also see "I - Character Selection" on page
Configuration (General)" on page
Prompts/Code Page Inquiry" on page
Chapter 7 — Commands
,p UIp ,p ,p
7 8 9 10
111, and
115.
81, "U- Print
"UI - Enable
117