R - Set Relative Reference Point - Intermec EasyCoder PC4 Programmer's Reference Manual

Chapter 7 — Commands

r - Set Relative Reference Point

Purpose:
Syntax:
Remarks:
106
This command is used to move the reference point for the x-axis
and y-axis relative to the label width set by a previous q
command.
rp ,p
1 2
.
r Command Parameter Descriptions
Parameter Description
p Horizontal (left) margin measured in dots.
1
Default is 000.
p Vertical (top) margin measured in dots. Default is
2
000.
The relative reference point command is used to establish the top
and left margins relative to the label width. For narrow labels, the
r command can be used after a q command, which has the
benefit of making better use of a limited image buffer. The values
for the latest r command (or R, whichever was last executed) are
printed on the test label.
The print direction commands ZB and ZT affect the location of
the relative reference point as illustrated.
Label width set by q command
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
Maximum Print Width