Intermec EasyCoder PC4 Programmer's Reference Manual page 48

Printer Prompt
UI80,001
Enter Product name:
Enter Model number:
100001
Number of label sets
P1
Copies of each label
1
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
To have the printer prompt the operator to enter data, use the
serial interface for communication between printer and host and
send a UI command after each power-up, as shown.
Command Explanation
CR/LF to start command structure
Enables prompts command (optional)
UI
Printer returns code page status
Retrieve form
FR "TEST"
Call for variables
?
Substitute variable V001
EASYCODER
Substitute variable V01
501SA
Reset, accept, or enter 2 counter start value C0
100000
Prompt
Ignore
Enter P and quantity of labels
P1
Prompt
Enter number of copies
2
Note: The optional Keyboard Display Unit automatically sends
the UI command at power-up.
It is not necessary to reset the counter start value. The counter
keeps track of the last number issued as long as the power
remains switched on and is the counter is updated according to
instructions in the form.
Command Explanation
CR/LF to start command structure
Retrieve form
FR"TEST"
Call for variables
?
Substitute variable V00
EASYCODER
Substitute variable V01
501SA
Substitute variable V02
Dan
CR/LF to use existing counter value
Print 2 copies of a single label
P1,2
Chapter 6 — Retrieving and Printing a Form
33