P - Print - Intermec EasyCoder PC4 Programmer's Reference Manual

Remarks:

P - Print

Purpose:
Syntax:
Remarks:
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
.
oR Command Parameter Descriptions
Parameter Description
p If p
1
code page position specified by p
parameters are give, all code pages are reset to the
original default character mapping.
p Specifies the code page position for the Euro
2
character in the range ASCII 32-255 decimal for
all code pages, provided p
the Euro character is mapped to the code page
position ASCII 213 decimal for all code pages
provided that p
The oR command is a global printer command and:
• cannot be issued inside a form.
• must be issued prior to issuing a text command and printing
it.
• affects a single character on all code pages. Changing the
character position restores the original character.
• Flash memory printer parameter data is preserved until
changed by the oR command, or the printer is reset to
default.
Example:
oRE
oRE,128
oR
This command is used to print the contents of the image buffer.
Pp1[,p2]
The P command cannot be used inside a stored form sequence.
For automatic printing of stored forms, use the PA command.
Chapter 7 — Commands
= E, the Euro character is mapped to the
1
1
= E.
1
. If no p or p
2 1 2
= E. If p is omitted,
2
95