C - Cut Immediate; D - Density - Intermec EasyCoder PC4 Programmer's Reference Manual

C - Cut Immediate

Purpose:
Syntax:
Remarks:

D - Density

Purpose:
Syntax:
Remarks:
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
This command is used to make the cutter perform a cutting cycle
without printing a form.
C
The command C is used for two purposes. C appended by
parameters is used to define counters in the Form Edit mode,
whereas C without any appending parameters is used to initiate a
cutting operation.
C (Cut Immediate) cannot be used inside a form or in
connection with a the Keyboard display unit.
To perform self-cleaning of the cutter blade, issue five
consecutive C commands without any media loaded.
Example:
To perform a cutting cycle, enter the command below:
C
This command is used to select the print density.
Dp
1
D- Density Parameter Descriptions
Parameter Description
p
Density settings (0-15). Default is 10.
1
0 is the lightest printing and 15 is the darkest.
The density command is used to control the energy to the
printhead. A number of factors affect the actual darkness of the
printout:
• Direct thermal printing or thermal transfer printing.
• Print speed.
• Different brands of direct thermal media.
• Different combination between transfer ribbons and receiving
face materials.
Chapter 7 — Commands
63