Usr - Read Serial Number; Uv - Product Identity And Asian Font Types; Define Variable - Intermec EasyCoder PC4 Programmer's Reference Manual

USR - Read Serial Number

Purpose:
Syntax:

UV - Product Identity and Asian Font Types

Purpose:
Syntax:
Remarks:
V - Define Variable
Purpose:
Syntax:
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
This command is used to read the serial number in EEPROM.
Note: This command can only be used on PF8 printers.
USR
This command generates output on the RS-232 or USB port
about the software and fonts stored in the memory cartridge.
UV
The first line returned after the UV command is base software
appended by a CR/LF, the next is one line with information on
the font appended by CR/LF.
This command is used to define variable data fields for use in
stored forms.
Vp ,p ,p ,"PROMPT".
1 2 3
V Command Parameter Descriptions
Parameter Description
p Variable reference number (00-99).
1
A maximum total of 1500 bytes of data for all variables is
allowed.
p Maximum number of digits for the variable
2
(1-99).
A maximum total of 1500 bytes of data for all variables is
allowed.
p Field justification:
3
L = Left justification.
R = Right justification.
C = Center justification.
N = No justification.
[-] A single leading minus sign in the prompt field causes
the prompt to be sent one time only after the form is
retrieved (Keyboard Display Unit only).
Chapter 7 — Commands
119