Continuous Stock - Intermec EasyCoder PC4 Programmer's Reference Manual

Chapter 7 — Commands
100

Continuous Stock

In case of continuous stock, parameter p
media feed performed after the actual print image has been
printed. Continuous stock is selected by setting parameter p
Be careful not having the printer loaded with continuous stock
when entering Dump mode or an error occurs.
Example 1:
Rectangular label (203.2 dpi = 8 dots/mm printhead):
p = 20.0 mm (160 dots)
1
p = 3.0 mm (24 dots)
2
p
1
The Q command would be:
Q160,24
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
decides the amount of
1
2
= 0.
p
2