Q - Set Label Width - Intermec PC4 Programmer's Reference Manual

Chapter 4 — ESim Commands

q - Set Label Width

Purpose: Use this command to set the label width when using less than full
Syntax: qp
106
p = 31 mm (248 dots)
1
p = 7.0 mm (56 dots)
2
p = 17 mm (136 dots)
3
p
1
Example 2: Printing in Between Perforations
The Q command would be:
Q248,B56-136
width labels.
1
.
q Command Parameter Descriptions
Parameter Description
p Width of label measured in dots.
1
Default:
832 at 203.dpi (8 dots/mm)
1208 at 300 dpi (11.81 dots/mm)
ESim for the PC4 and PF8 Printers Programmer's Reference Manual
Perforation
p
2
p
3